User manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Placing Your AirStation
- Chapter 3 - Installation
- Chapter 4 - Configuration
- Chapter 5 - Connect to a Wireless Network
- Chapter 6 - Trouble Shooting
- Appendix A - Specifications
- Appendix B - Default Configuration Settings
- Appendix C - Network-USB Navigator
- Appendix D - TCP/IP Settings
- Appendix E - Restoring the Default Configuration
- Appendix F - Shared Folders and the USB Port
- Appendix G - Regulatory Compliance Information
- Appendix H - Environmental Information
- Appendix I - GPL Information
- Appendix J - Warranty Information
- Internet Connection Setting Table
1
2
3
4
7
8
6
9
5
10
11
12
13
14
15
WBMR-HP-G300H User Manual 8
Chapter 1 Product Overview
Hardware Overview
Front Panel LEDs / Back Panel
1
AOSS Button
To initiate AOSS, hold down this button until the Security LED ashes (about 1 second). Then,
push or click the AOSS button on your wireless client device to complete the connection. Both
devices must be powered on for this to work.
2
Power LED
On (Green) : The AC adapter is connected.
O (Green) : The AC adapter is not connected.
Shows AirStation status.
2 blinks (Red)
*1
: Flash ROM error.
3 blinks (Red)
*1
: Wired Ethernet LAN error.
4 blinks (Red)
*1
: Wireless LAN error.
5 blinks (Red)
*1
: Network error.