User manual
21
Network (IP Address Properties)
By default, the TeraStation will attempt to
get its IP Address automatically from a DHCP
server. You may disable DHCP here. If
DHCP is disabled and an IP Address is not set
manually, it will default to 192.168.11.150.
The TeraStation’s IP Address, Subnet Mask,
Default Gateway Address, and DNS Server
address may all be entered manually under IP
Address Properties.
Ethernet Frame Size may also be set manually
on this page. Only use JumboFrame settings
when operating in a Gigabit environment where
all other clients support the same JumboFrame
setting.
Click Apply after making any changes.
Conguration GUI