User manual
TeraStation III iSCSI User Manual 54
Restore/Erase
Restore Factory Defaults
Restore TeraStation Click Restore TeraStation to initialize the following settings: TeraStation Name, NTP
Settings, RAID Scanning, Upon restore, Email Notication Settings, UPS Settings,
Administrator Settings, Network Settings (IP Address, Subnet Mask, etc.), Alert
Sound Settings, Front Panel Settings, RAID Array Failure Settings, Management
Information, Languages Settings, Syslog
You may choose to not initialize the admin username and password when other
settings are initialized from the front panel button. Click Modify Settings to change
this setting. If you select Keep current admin password, you will not be able to
make any further changes to the settings of the TeraStation without the admin
username and password. Write them down and do not lose them!
Erase
Erase Clicking Erase will erase data on the drives on the TeraStation completely. All data
and settings will be lost. Back up any important data before! You cannot change
the conguration of the TeraStation while erasing data.
Ping Test
Ping Test
Ping Test Enter the target IP Address in Target IP Address, and click Ping. The response is displayed in Result.
System
System
System Information Displays TeraStation Name, Model Name, Firmware version, NTP, Date and Time,
Time Zone, Email Notication, Fan Status, etc.
Network
Network
Network Information Displays MAC Address, IP Address, Subnet Mask, Ethernet Frame Size, Primary DNS
Server, Secondary DNS Server, Default Gateway Address, Port Trunking, etc.
Connection History
Connection History
Connection History Displays Date/Time, Status, Volume Name and “Initiator Name.
Status