User manual

TeraStation III iSCSI User Manual 45
Chapter 8
List of Items in Settings
Common Items (left side of the screen)
Common Items (Displayed on the left side of the screen)
iSCSI Service
Click OFF to stop the iSCSI service; ON to start it. Always stop the iSCSI service before creating or
extending volumes.
Name Displays the TeraStation’s name.
Firmware version Displays the TeraStation’s rmware version number.
IP Address Displays IP address of the TeraStation’s LAN ports 1 and 2.
Place Displays the Place from Basic - Settings - Management Information.
Manager Displays the Administrator from Basic - Settings - Management Information.
Clients Displays connected client
Locate TeraStation Click to make the TeraStation beep.
Restart/Shutdown
To restart the TeraStation, click Power Management, then Restart. To turn o the TeraStation,
click Shut Down under “Shutdown TeraStation”.
Logout * Log out of Settings.
*
Displayed on the upper right of the screen
The following options can be set from Settings.
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes To add volumes, click Create Volume.
To edit a volume, click a volume name.
Select a volume and click Delete Volume to delete the volume.
Click Refresh to update the volume information.
Select a volume and click Activate will enable the iSCSI service for the selected volume.
Select a volume and click Inactivate will disable the iSCSI service for the selected volume.
Note:
If the IP address of the computer is displayed in the iSCSI volume screen even though the iSCSI
volume is not connected to the computer, enabling or disabling the iSCSI volume or LVM will
fail.
Turning o or disconnecting the computer without disconnecting the drive with iSCSI
Connection Tool may cause this symptom. If this happens, connect the iSCSI volume with iSCSI
Connection Tool after rebooting the computer, or stop the iSCSI service once and perform
enabling/disabling operation of iSCSI Volume or LVM.