User manual
TeraStation III iSCSI User Manual 41
Changing the IP address
If desired, you may manually set the TeraStation’s IP address. Use the iSCSI Connection Tool (included on your CD) to
manually set the TeraStation’s IP address.
Note:
You can only change the TeraStation’s IP address settings from a computer that is connected to the same subnet as the
TeraStation.
1
2
Click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool.
For Windows 8, click the iSCSI Connection Tool.
3
Select your TeraStation from the Target dropdown menu, then click Conguration, then Change IP Address.
4
5
Turn iSCSI Service back on.
You have changed your TeraStation’s IP Address settings.
2 You may enter IP Address, Subnet Mask, and Default Gateway.
1 If you have a DHCP server on your network, check Obtain IP address auto-
matically to have your IP address set automatically.
3 Enter the admin password in Administrator Password eld. The admin
password is required to change IP address settings.
4 Click OK.
Turn o iSCSI Service on the left side of Settings.