User manual
TeraStation III iSCSI User Manual 23
Using RAID 1 mode
1
Delete any preexisting array as described in “Using Normal mode” on page 19.
2
3
4
5
Note:
Building the RAID array will take about 10 hours per TB of drive space. During this time, the LCD will display “RAID
ARRAY x Resyncing” and le transfers will be slower than usual. Do not turn o the TeraStation until the array is
built, or the process will start over at reboot.
6
The Conrm Operation screen will appear. Enter the displayed number and click Apply within 60 seconds to
continue.
7
Follow the instructions displayed on the screen.
You have congured a RAID 1 array with 2 drives. Refer to page 15 to create a volume on the array. Use “Disk
Management” on Windows to format the volume, then connect to the formatted volume with iSCSI Connection Tool and
use it as a local drive on your computer. For best results, congure one or both of the remaining drives as a hot spare (page
25).
Select disk 1 and disk 2, or disk 3 and disk 4.
1 Select RAID 1.
2 Click Create Raid Array.
In Settings, navigate to Basic - Storage - RAID Array.
Choose the array you want to congure.