User manual

TeraStation III iSCSI User Manual 22
Using RAID 10 mode
1
Delete any preexisting array as described in “Using Normal mode” on page 19.
2
3
4
5
Note:
Building the RAID array will take about 10 hours per TB of drive space. During this time, the LCD will display “RAID
ARRAY x Resyncing” and le transfers will be slower than usual. Do not turn o the TeraStation until the array is
built, or the process will start over at reboot.
6
The Conrm Operation screen will appear. Enter the displayed number and click Apply within 60 seconds to con-
tinue.
7
Follow the instructions displayed on the screen.
You have congured a RAID 10 array. Refer to page 15 to create a volume on the array. Use Disk Management on
Windows to format the volume, then connect to the formatted volume with iSCSI Connection Tool and use it as a local
drive on your computer.
Select all four hard drives.
1 Select RAID 10.
2 Click Create Raid Array.
In Settings, navigate to Basic - Storage - RAID Array.
Choose the array you want to congure.