User manual

TeraStation III iSCSI User Manual 16
Extending Volumes
Volume space can be extended after you create the volume.
Notes:
• Extending the volume may delete all data on the volume with some le systems. Before extending the volume, back
up any important data on the volume.
• LVM must be enabled in order to extend volumes. Refer to page 14.
1
2
3
4
5
Click Save at the bottom of the screen.
6
Turn iSCSI Service back on.
Note:
To start iSCSI service for the target volume only, navigate to iSCSI Volumes - iSCSI Volumes, select the target
volume, and click Activate.
You have now extended the size of a volume.
Note:
Your OS may not detect extended volumes. In this case, reinitialize and reformat the extended volume before use.
2 Enter the amount of space to increment the volume in GB.
1 Check the Enlarge Size box.
Turn o iSCSI Service on the left side of Settings.
Note:
To stop iSCSI service for the target volume only, navigate to
iSCSI Volumes - iSCSI Volumes, select the target volume, and click
Inactivate.
Navigate to iSCSI Volumes - iSCSI Volumes.
Click the volume you want to extend.