User manual

TeraStation IS Setup Guide 8
Current status Displays Current status of the selected volume.
• Not connected. Volume is disconnected.
• Connected. Volume is connected.
• Connected to other computer. Volume is connected to other computer. Displays other computer's IP
address.
*You must register TeraStation as an iSCSI hard drive at “Target product" to display it.
User
Authorization
Displays user authentication for the specied volume.
Disabled: No authentication
Enabled: With authentication. User authentication is needed to connect to a volume.
*You must register TeraStation as an iSCSI hard drive at “Target product" to display it. It is not displayed
when the volume is already connected from other computer.
Connect on
Start Up
Displays check mark in the check box, and click “Connect (or Remove)” to set the volume automatically
connected when the computer is booted (always connected).
Uncheck the check mark and click “Connect (or Remove)” to set the volume automatically not connected
when the computer is booted (always connected).
*You must register TeraStation as an iSCSI hard drive at “Target product" to display it. It is not displayed
when the volume is already connected from other computer.
Refresh Search the TeraStation within the LAN.
Exit Exit iSCSI Hard Disk Connection Tool.
Menu Navigation:
File Refresh Search the TeraStation within the LAN.
Exit Finish iSCSI Hard Disk Connection Tool.
Setup Browse Web setting Opens the Conguration Screen of the selected TeraStation.
Change IP Address Open “Change IP Address” screen. You can change the IP address of the
selected TeraStation.
Remove the registered
iSCSI Hard Disk
Displays “Remove the registered iSCSI Hard Disk” screen.
If you disconnect the TeraStation without unregistering it or changing its IP
address, it will take a long time to search since the registration information
stays in your computer. In such a case, unregister old TeraStation from “Remove
the registered iSCSI Hard Disk” screen.
Set Mutual CHAP Secret Set the CHAP password on the computer side.
Use share folder on a
Persistent Volume
If TeraStation is always connected and folders are shared in the network, click
this to insert the check mark. If the checkmark is not inserted, the share will be
disconnected when the computer is restarted.
Connect some Volumes Displays the screen to connect multiple volume at a time.
Disconnect some
Volumes
Displays the screen to disconnect multiple volume at a time.
Launch “Disk
Management”
Displays the Disk Management screen on Windows.
To use the connected TeraStation, you must reserve the volume area and
format it on the Disk Management Screen.
Help Version Displays iSCSI hard drive version information.