User manual
TeraStation IS Setup Guide 6
Refer to the separate "Quick Setup Guide" for connection instructions.
▼
Turn on your computer
▼
Insert the Utility CD included in the package into the CD/DVD drive
▼
After "TeraNavigator" launches, follow the instructions on the screen.
▼
Launch the iSCSI Hard Disk Connection Tool, click “Register the iSCSI Hard Disk”,
then “Connect”.
Setup
Notes: • If there is a DHCP server in the network, the TeraStation will get an IP address from it automatically.
• Running the TeraNavigator software will automatically assign an unused IP address to a TeraStation.
• TeraNavigator can automatically congure only one unit at a time. To recongure a TeraStation with
TeraNavigator after its initial installation, initialize the TeraStation rst.
• If no DHCP server is available and TeraNavigator is not run, a random IP address of the form 169.254.
xxx.xxx (where each xxx is a random number from 1 - 256) will be assigned to the TeraStation.
If you are using Windows 2000, XP, 2000 Server, or Server 2003, install the "Microsoft
iSCSI Software Initiator" before installing the TeraStation.
Run TeraNavigator separately for each iSCSI TeraStation.
Note: If no DHCP server is available on the network, an IP Address of the form 169.254.xxx.xxx is randomly
assigned. Run TeraNavigator to congure the Terastation automatically.
Adding multiple TeraStations