User manual

TeraStation IS Setup Guide 54
Restore/Format
Restore
Factory
Defaults
Restore
TeraStation
Click “Restore TeraStation” to initialize the following settings: TeraStation Name, NTP
settings, RAID Scanning, Restore/Format, Mail Notication, UPS Settings, Administrator
Settings, Network, Alert Sound Settings, Front Panel Settings, RAID Array Error Detection
Response, Management Information, Place
You may choose to not initialize the admin username and password when other settings
are initialized from the front panel button. Click “Modify Settings” to change this setting.
If you select “Keep current admin password”, you will not be able to make any further
changes to the settings of the TeraStation without the admin username and password.
Write them down and do not lose them!
Format
TeraStation
Format
TeraStation
Click “Format TeraStation” to format the drives on the TeraStation. All data and settings
will be lost. Back up any important data before formatting the TeraStation! During the
format, conguration settings cannot be changed.
Ping Test
Ping Test
Ping Test Enter the target IP Address in “Target IP Address", and click “Ping". The
response is displayed in “Result".
System
System
System
Information
Displays TeraStation Name, Model Name, Firmware version, NTP, Date and Time, Time
Zone, Email Notication, Fan Status, etc.
Network
Network
Network
Information
Displays IP Address, Subnet Mask, Ethernet Frame Size, Primary DNS Server, Secondary DNS
Server, Default Gateway Address, Port Trunking, etc.
Connection History
Connection
History
Connection
History
Displays the Volume Connection Log, Volume, Status, Volume Name and Initiator Name.
Status