User manual

TeraStation IS Setup Guide 53
Alert Sound
Settings
Click “Modify
Settings”
to change
settings.
Alert Sound
Settings
Beep alerts can be triggered by the following conditions : “Overheating", “Disk
Error", “FanError", and “UPS Power Error".
Power Management
UPS Settings
Click “Modify
Settings”
to change
settings.
Synchronize
with UPS
“Enable" to sync the TeraStation with a UPS. “USB Port/APC Style (or OMRON Style)” can
only be set if your are using a USB type UPS manufactured by APC.
UPS
Connection
Type
Select a connection method for the UPS. “USB Port/APC Style (or OMRON Style)” can be
set only when you are using USB type UPS manufactured by APC.
TeraStation
behavior
When Power
failure
You may set how long the Terastation runs after a power failure before it shuts down. Or,
you can set it to shut down when the UPS signals "Battery Low". Shutting down when
the battery is low is only available when the UPS is connected with a USB cable. You can
also set the TeraStation to shut down when the number of iSCSI connections becomes 0
(zero).
UPS Behavior
After
TeraStation
has shut down
You may also elect to have the UPS shut down after the TeraStation shuts down.
UPS Recovery
function
Enable to have the TeraStation reboot automatically when normal AC power is restored.
Restart
TeraStation
Restart Click “Restart” to reboot the TeraStation.
Shutdown
TeraStation
Shutdown Click “Shutdown” to turn off the TeraStation. To turn it back on, press the power button
on the front of the unit.
Front Panel
Settings
Click “Modify
Settings”
to change
settings.
Display Select items to display on LCD display at the front of the TeraStation from “Host IP",
“Disk Mode", and “Time".
Flip Display Items Set if automatically switching the item to display on the LCD or not.
LCD brightness Adjust backlight brightness of the LCD display in 5 levels.
LED brightness Adjust the brightness at the front of the TeraStation in 5 levels.
LED
Synchronization
Select whether using the feature to change the LED brightness synchronized with
time. For example, you can change the brightness on day time and night time.
LED brightness
(Sleep)
Adjust the brightness of LED in 4 levels while in dark.
Begin Sleep Set the time (0 to 23 o'clock) to darken LED brightness. This can be set in every 00
minute at 1 hour interval.
Wakeup Set the time (0 to 23 o'clock) to change LED brightness back to the normal setting.
This can be set in every 00 minute at 1 hour interval.