User manual

TeraStation IS Setup Guide 46
Create Volume
To display,
click “Create
Volume" on
the Volume
Conguration
Screen.
Volume Name Enter a name for the volume.
* You can enter up to 12 alphanumeric characters (number of characters depends on
byte of character).
* You may use hyphens (-).
* Do not use a number or symbol as the rst character of the name.
Volume
Description
Enter a description for the volume.
* You can enter up to 50 alphanumeric characters or 25 two-byte characters.
* You can use alphanumeric characters, two-byte characters, hyphens, and
underscores.
Disk Area Select hard disk space to create a volume.
Size Enter the volume capacity (size).
Access Control Click “Enable" in “Access Control" to apply Access Restrictions.
You will be required to enter the user name and password you entered here when
connecting with the iSCSI HDD Connection Tool.
Select “Mutual Authorization" on the User Authorization Screen upon connection
when you have set the password in “Password (Mutual Authorization)”. The screen
to enter the mutual authentication password is displayed again. Enter the mutual
authentication password you set and connect to the unit.
To restrict access by IP address, click “Enable" in “IP Address Restriction”. Only IP
addresses that are entered in the IP Address List are allowed access.
Input parameters for IP address restrictions
Enter all IP addresses as 192.168.11.1,192.168.11.2.
Use commas to separate IP addresses.
You can simply type 192.168.11.1 if there is only one IP address.
All IP addresses will be allowed if nothing is entered.
Only entered IP address(es) are allowed to connect.
Advanced
Settings
Not supported.
If you change settings here and can no longer connect to a volume, restore default
settings and recongure.
LVM
Logical
Volume
Manager
(LVM)
Selecting a drive and clicking “Enable LVM” will enable the Logical Volume Manager
(LVM) for the selected drive.
Selecting a drive and clicking “Disable LVM” will disable the Logical Volume Manager
(LVM) for the selected drive.