User manual

TeraStation IS Setup Guide 42
Using Jumbo Frames
If all of your network devices support jumbo frames, enabling them can make your network faster. To congure
jumbo frames on the TeraStation, navigate in the conguration utility to “Basic" - “Network" - “Ethernet Frame
Size”, click “Modify Settings", and change the Ethernet frame size to one of the jumbo frame settings: 4102, 7422,
or 9694 bytes.
Caution: If you enable jumbo frames but some of your network devices don’t support it, you may not be able
to transfer data. If you run into compatibility issues, disable jumbo frames and set all of your network devices
to use standard 1518 byte frames.
Connection Transmission
Transmit
Jumbo Frame
( 4102/7422/9694)
LinkStation
Jumbo Frame
( 4102/7422/9694)
Jumbo Frame
supported
Jumbo Frame
supported
LinkStation
Jumbo Frame
( 4102/7422/9694)
Jumbo Frame
Supported
Jumbo Frame
not supported
LinkStation
Jumbo Frame
( 4102/7422/9694)
Jumbo Frame
not supported
Jumbo Frame
not supported
LinkStation
Jumbo Frame
( 4102/7422/9694)
Jumbo Frame
not supported
Jumbo Frame
supported
Transmit
normally(1518)
Transmit
normally(1518)
No transmission
This illustration shows TS-IXL TeraStations.