User manual
TeraStation IS Setup Guide 37
Encrypting Drives
If “Encryption” is check when a drive is formatted, the drive will be encrypted with 128 bit AES encryption. The
data on the drive will only be readable when the drive is attached to your TeraStation. It will not be readable
from other devices. To unencrypt the hard drive, uncheck “Encryption” and format the drive again. Refer to the
previous page for more information.
Note: Encrypting a drive degrades its overall performance somewhat.
Dismounting a Drive
Before removing a drive from the TeraStation, dismount the drive. Follow the instructions below to dismount
the drive.
Note: Repeatedly dismounting and/or removing drives is not recommended. Only dismount and remove
drives if you have a good reason for doing so.
1
2
The Confirm Operation screen will appear. Type in the confirmation number and click “Apply” within 60
seconds.
3
Follow the instructions displayed on the screen.
It’s now safe to physically remove the hard drive.
1
In the conguration utility, navigate to “Basic”-”Storage”.
2
Select the drive you want to remove and click “Remove Disk”.