User manual

TeraStation IS Setup Guide 31
Mail Notication
You can choose to send status report emails from the TeraStation to a specied email address. Emails are normally
send when TeraStation settings are changed or an error occurs.
Status emails contain the following:
・hard drive status
• RAID conguration changes
• RAID errors
• Fan errors
• Drive read errors
• Drive replacement alerts
1
2
6
To use a secure connection, select SSL/TLS.
7
Enter the subject line for notication Emails.
Note: Use single-byte alphanumeric characters only. Hantsu, kanji, and other double-byte characters
should not be used. .
8
Enter an email address. Up to 5 email addresses may be entered.
1
Enable Mail Notication.
2
Enter the SMTP server address and SMTP port number.
Note: If using pop before smtp, enter the POP3 server address and POP3
port number.
3
Select the authentication type from Disabled/POP before SMTP/
LOGIN (SMTP-AUTH)/CRAM-MD5(SMTP-AUTH/CRAM-MD5)).
4
Enter a username.
5
Enter a password.
Note: You cannot use ' (a single quote mark) for a password.
1
To congure status email reports, navigate to “Maintenance” -
“Maintenance” in the conguration utility.
2
Under Mail Notication, click “Modify Settings”.