User manual

TeraStation IS Setup Guide 30
RAID Scanning
A RAID scan tests your RAID array for errors. If errors are found, they are xed automatically if possible. If you
are using a RAID array, regular RAID scans are recommended. Congure a schedule for RAID scans as below.
1
2
Check “Begin Immediate RAID Scan” to start a RAID scan immediately. To stop a RAID scan, click “Abort RAID
Scanning”.
You have congured RAID scanning.
1
Click “Enable”.
2
Select a schedule for RAID scanning.
Note: Check “Shutdown” to automatically shut down the TeraStation
if a RAID error is found.
3
Click “Save”.
1
In the configuration utility, navigate to “Basic” - “Storage” - “RAID
Scanning”.
2
Under RAID Scanning, click “Modif y Settings”.