User manual
TeraStation IS Setup Guide 24
Conguring a RAID 0 array
1
Delete any preexisting array as described in “Configuring Normal mode” on page 19.
2
3
4
5
6
The confirmation screen will appear. Enter the displayed number and click “Apply” within 60 seconds to
continue.
7
Follow the instructions displayed on the screen.
You have congured a RAID 0 array. Refer to page 15 to create a volume on the array. Use Windows Disk
Management to format the volume, then connect to the formatted volume with the iSCSI hard disk connection
tool and use it as a local drive on your computer.
Select all 4 hard drives.
1
Select “RAID 0”.
2
Click “Create Raid Array”.
In the configuration utility, click “Basic” - “Storage” - "RAID Array”.
Choose the array you want to congure.