Specifications

CONAX BUFFALO TECHNOLOGIES TSD 43.021
Rev. ORIG
Page 3 of 28
1.0 SCOPE
This manual provides instructions on setup and use of Conax Buffalo
Technologies, PC- Programmable, SPM-4XX series Indicators.
2.0 APPLICABLE DOCUMENTS
2.1 Conax Buffalo Technologies (CBT) Sales Order.
2.2 Customer Purchase Order (specified in CBT Sales Order).
2.3 Either CBT Part Number 80-0034-001 (CDROM) or 80-0034-002 (3.5” diskettes),
Programming Software for PC-Programmable Indicators.
2.4 CBT Part Number 318997-001, Programmable Adaptor Cable, Model No. PA-
400.
2.5 CBT Drawing No. 10-0554; Indicator, Model No. SPM-400.
3.0 GENERAL DESCRIPTION AND STANDARD FEATURES
The SPM-4XX indicators are state-of-the-art, micro-processor and flash memory
based, high performance indicators. All models can be fully configured using the
user friendly configuration software. This unique and user-friendly software
facilitates logical and speedy setup of the indicators using only a Windows® PC,
RS-232 serial port and the PA-400 serial adapter cable. No calibrator or meter is
required.
The SPM indicators are supplied with input and output reference parameters fully
factory calibrated. For actual operation all that is required is to perform the
simple and easy configuration procedure.