Specifications

CONAX BUFFALO TECHNOLOGIES TSD 43.021
Rev. ORIG
Page 14 of 28
6.3.4 You can enable another toolbar icon that can configure several indicators with
the same settings. To do so, click “Options” and “General” from the top menu of
the main screen. Enable the “Regeneration Enable” option and click “OK”. To
configure a new indicator with the preloaded settings, click the regeneration icon,
on the icon bar of the main screen. The computer will automatically upload
the calibration parameters, calculate the proper configuration parameters and
download them into the indicator’s non-volatile memory.
6.3.5 Printing Configuration and Calibration Information. Click on the “PRINTER”
icon on the tool bar to initiate the printing of the indicator’s configuration and
calibration information. The report will include the values of the unit’s own input
and output calibration reference codes, configuration reference codes, current
time and date, the date of last configuration, and the date of the last calibration.
The printed information can provide invaluable data in the system’s performance
research, error corrections, and “before” and “after” analysis. See Table 1.