User manual

I54 A backup task has failed.

Make sure that the backup task is

configured correctly. Make sure that the

NAS is on and not in standby mode. If the

backup task still fails, check the status

of the network and backup source and

destination.

Amber (Not Blinking)

When the power LED glows a steady amber, a new firmware version is available. Update the firmware to the newest

version.

Default Settings

Administrator’s Name admin

Password password

Shared Folders

“share” (for both Windows and Mac computers). The recycle bin is enabled on

“share” by default.

DHCP Client

Normally, the LinkStation will get its IP address automatically from a DHCP

server on the network. If no DHCP server is available, then an IP address will

be assigned as follows:

IP address: 169.254.xxx.xxx (xxx is assigned randomly when booting the

LinkStation.)

Subnet mask: 255.255.0.0

Registered Groups

“hdusers”, “admin”, and “guest”

These groups cannot be deleted or modified.

Microsoft Network Group Name WORKGROUP

Ethernet Frame Size 1500 bytes (not including 14 bytes of header and 4 bytes of FCS)

SMB2 Disabled

AFP Enabled

FTP Disabled

NTP Enabled

Print Server Disabled

WebAccess Disabled

Time Machine Disabled

DLNA Server Disabled

iTunes Server Enabled

BitTorrent Disabled

USB Device Server Disabled

Function Button Initialization Restore factory default settings

Update Notification Enabled

Specifications

Check www.buffalotech.com for the latest product information and specifications.