User manual

81
Click your LinkStation’s icon to open a share on the LinkStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Name Description
Open Opens the default shared folder for a selected LinkStation.
Refresh Searches for NAS devices on the network again.
Settings Opens Settings for the selected LinkStation.
Configure
Opens a window that lets you configure the NAS’s IP
address or open Settings.
Label Color Selects the color of the name displayed below the icon.
View Options Lets you choose icon size, position, and view mode.
Auto Power Mode
Auto power mode can turn supported TeraStations and
LinkStations on the network on and off automatically.
To display these options,
hold down the control
key and select your
LinkStation’s icon.
Open Folder Opens the LinkStation’s shared folder.
Settings Opens Settings for the selected LinkStation.
Configure
Opens a window that lets you configure the NAS’s IP
address or open Settings.
Label Color Selects the color of the name displayed below the icon.
Mount as Network Drive
You can map a shared folder as a network drive from NAS Navigator2.
1 Click the icon in the Dock. NAS Navigator2 will launch.
2 Double-click the LinkStation icon or click the LinkStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.