User manual

74
To use a different NTP server, navigate to Management - Name/Time/Language. Click Time, then Edit. Uncheck “Use
Default NTP Server” and enter a new NTP IP address. Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date from
your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
LinkStation.
Note: The internal clocks of the LinkStation and other devices on your network may run at slightly different speeds.
Over a long period of time your network devices may show somewhat different times, which can cause network
problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best
results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP server to
correct them all automatically.
6 Click the Language tab. Select the language to be used in the Windows client, then click OK.
Note: This tab changes the language used by the LinkStation for email notification, DLNA, and other functions. To
change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the menu
bar. Choose your desired language from the drop-down menu.
Jumbo Frames
If your other network devices support it, you may be able to increase network performance with jumbo frames.
1 In Advanced Settings, click Network.
2 Click to the right of “IP Address”.
3 Select the LAN port.
4 Click Edit.
5 Select your desired Ethernet frame size and click OK.