User manual

55
2 Connect the USB device. When it mounts (about 10 seconds), the function LED will light up.
Note: Devices that don’t trigger the function LED to light up are not supported.
3 You now have 60 seconds to hold down the function button for 3 seconds. If you do, the function LED will flash as
all the files on the USB device are copied to the Direct Copy folder of the LinkStation.
Notes:
• While the function LED is flashing, hold the function button down for 3 seconds to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click OK.
4 When the copy operation is finished, the access LED of the USB device will stop flashing. Hold down the function
button for 8 seconds. The function LED will flash as all external drives are dismounted, which will take about 30
seconds. When the dismount is finished, the function LED will stop flashing and glow steadily. You now have 60
seconds to unplug any USB drives safely.