User manual

16
TCP/IP
Configure print server’s network settings here.
Network - TCP/IP
Note: Only assign the print server a valid IP address, otherwise Settings cannot be accessed. If you cannot open
Settings, initialize the print server, which restores all settings to their factory default values.
DHCP
If you’re using DHCP on your network, enable it here. If you don’t use DHCP,
you’ll need to configure the print server’s IP address manually.
IP Address
If DHCP is not available on your network, you may configure the print server’s
IP address manually here.
Subnet Mask
If DHCP is not available on your network, you may configure the print server’s
subnet mask manually here.
Default Gateway
If DHCP is not available on your network, you may configure the print server’s
default gateway address here. If 0.0.0.0 is entered here, no default gateway is
used.
WINS Server
You may enter a WINS server address here (optional). If DHCP is in use, the
WINS server assigned by DHCP will override this setting.