Operation Manual
Using your LinkStation
LinkStation User Manual 56
5 Enter a password that will be used to verify.
6 To use a secured connection, select SSL/TLS.
7 Enter the subject for notication e-mail. Click [Reset to Default] to reset the subject line to [Link-
Station Status Report].
8 Enter a receiver's e-mail address. E-mail can be sent to up to 5 addresses.
9 Select conditions for emails to be sent.
• HDD Status Report Sends status of hard drive periodically.
• Fan Trouble Sends a message when a fan error occurs.
• Disk Error Sends a message when a hard drive fails.
• Backup Complete Sends a message when the backup is complete.
10 If you have selected [HDD Status Report] for sending condition, select time to send.
11 Click [Save].
4
Click [Send Test Message] to send a test message.