Operation Manual

Chapter 3 Web Administration Tool
LinkStation User Manual 124
Name Descriptions
Maintenance
Restart
Restart
LinkStation
Click [Restart the LinkStation] to reboot the LinkStation.
Power Management
UPS
Settings
Click
[Modify
Settings]
to change
settings.
UPS Status This is the feature to shutdown the LinkStation automatically when the UPS runs
by battery due to power outage and such. If the UPS is connected, it shows the
status of the UPS.
Note: This setting must be done after connecting the UPS and the LinkStation
with a USB cable.
Synchronize
with UPS
Select [Enable] when using Synchronization with UPS feature.
Note: [USB Port / APC Style (OMRON Style)] can be only set when an APC USB
UPS is connected.
UPS
Connection
Type
Select a connection method with UPS.
Note: [USB Port / APC Style (OMRON Style)] can be only set when UPS
manufactured by APC for USB connection is connected.
LinkStation
behavior
When Power
failure
Allows you to set the time until shutdown when the power failure continues. Or,
it can shut down when it detects "Battery Low" from UPS.
Note: Shutting down by Battery Low can be used only when UPS for USB
connection is used.
UPS behavior
after
LinkStation
shutdown
Specify whether or not to shut down the UPS after shutting down the
LinkStation.
Sleep
Timer
Click
[Modify
Settings]
to change
settings.
Timer Interval Select Sleep Timer interval from [Disable], [Everyday], or [Specic day of the
week]. If selecting [specic day of the week], specify the day by clicking the
check box of the day. Timer can be set from 1 - 3.
Wake up at Specify the restart time which recover from the Standby to the Normal state.
You can set time from 0:00 to 23:45.
Begin Sleep at Specify the ending time to move from Normal state to Standby State. You can
set time from 0:00 to 27:45.
Note: You can not set the ending time before or the same time as a beginning
time.