Operation Manual

Chapter 3 Web Administration Tool
LinkStation User Manual 113
System
The following options can be set from the System tab.
Name
Descriptions
Settings
Name
Click
[Modify
Settings]
to change
settings.
LinkStation Name
Enter a name to identify the LinkStation on the network. Names may
contain up to 15 alphanumeric characters, hyphens, and underscores.
Don’t use a hyphen or underscore as the rst character of a name.
Description
Descriptions may contain up to 50 alphanumeric characters or 25
two-byte characters. You can use alphanumeric characters, two-byte
characters, spaces, hyphens, and underscores.
Don’t use a space as the rst character in a description.
Descriptions are only displayed in Windows. They will not be displayed on
a Macintosh.
Date and
Time
Click
[Modify
Settings]
to change
settings.
Date/Time Source
Select [Automatic] to use an NTP to correct system time automatically.
Select [Manual] to set time manually.
Primary NTP IP
Address
Enter the DNS name or the IP address of an NTP server. You may user ntp.
jst.mfeed.ad.jp or 192.168.11.123, for example.
To specify ntp.jst.mfeed.ad.jp as the NTP server, select [Use the default NTP
server (ntp.jst.mfeed.ad.jp)].
NTP
Synchronization
Frequency
You may have NPT correct your system time [Daily], [Weekly], or [Every 3
hours].
Time Zone
Specify Time Zone.
Date
Displays year, month and date. Enter numbers to change these values.
Time
Displays time. Enter numbers to change the value manually. Click [User
Local Date/Time] to obtain time and time zone from the internal clock of
your computer.
Note: If system clocks on your network get more than 5 minutes o from
each other, it may cause problems with your network. For best results, use
an NTP server to automatically set the system time for all of your network
devices, including the LinkStation.
Language
Click
[Modify
Settings]
to change
settings.
Display Language Select the language to be displayed.
Windows Client
Language
Select the language to be used in the Windows client.