Service manual

BUFFALO FTD-G931AS/BK
6
3. OPERATING INSTRUCTIONS
3.1 GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of
the monitor. By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
- Press the power button to turn on the monitor, the power indicator will light up.
3.2 OPERATING INSTRUCTIONS
NO. Within OSD Without OSD
1 Power Button Turn on/off Turn on/off
2 MENU Button
1.Enter the OSD sub menu
2.Select the OSD menu
Open OSD menu
3 Left Arrow/- Button
1.Move the cursor to left
2.Adjust down when menu
item selected
Open Bright menu
4 Right Arrow/+ Button
1.Move the cursor to left
2.Adjust down when menu
item selected
Open the Volume menu
5 Exit Button
1.Exit Sub menu
2. Exit the menu item
Run the Auto Adjust when this
button keep to push for 1 second
Hot keys
Button Function Remark
Left Arrow/- Button
To change the ECO mode and
MAX mode and User mode
The item adjust the power consumption to
change the luminance
Right Arrow/+ Button To Adjust the Volume
When Mute function is ON, if they change
the volume then mute function is off
Exit Button To run the Auto Adjust
When this button keep to push for 1
seconds