SERVICE MANUAL FTD-G931AS FTD-G931AS/BK THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY.EVERY REASONABLE EFFORT HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY OFTHIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RELIABILITY FOR CHANGES, ERRORS OR OMISSIONS.
BUFFALO FTD-G931AS/BK Table of Contents Table of Contents ----------------------------------------------------------------------------------------------------------- 02 Revision List ------------------------------------------------------------------------------------------------------------------03 1. Monitor Specification ---------------------------------------------------------------------------------------------------04 2.
BUFFALO FTD-G931AS/BK Revision List Revision Date Change Description A00 Nov-01-04 T980KAXNJSB1A A01 Mar.
BUFFALO FTD-G931AS/BK 1.MONITOR SPECIFICATIONS LCD Panel Input Power consumption Operating condition Storage condition Driving system TFT LCD Size 19.0"(48.18cm) Active Area Horizontal: 376.32mm Vertical: 301.056mm Panel AU M190EN03 Pixel pitch 0.294mm(H) x 0.294mm(V) Viewing angle 170(H) 170(V) (CR>10) Luminance 250 cd/m2 (typ) Contrast Ratio 800:1 (typ) Response time 20ms (typ) Display colors 16.7M Colors RGB 0.
BUFFALO FTD-G931AS/BK 2.LCD MONITOR DESCRIPTION The LCD MONITOR will contain an main board, an inverter/power board, an audio board, keypad board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage. Monitor Block Diagram CCFL Drive.
BUFFALO FTD-G931AS/BK 3. OPERATING INSTRUCTIONS 3.1 GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. - The power cord should be connected. - Connect the video cable from the monitor to the video card. - Press the power button to turn on the monitor, the power indicator will light up. 3.2 OPERATING INSTRUCTIONS NO.
BUFFALO FTD-G931AS/BK 3.3 ADJUSTING THE PICTURE Steps: 1.Press MENU button to display OSD main menu, Press Left button or Right button may select other main Menu. 2. Press MENU button to adjust items of each main menu. 3. Press Left button or Right button may select item you wish to enter. 4. Press MENU button to enter, and press Left button or Right button to adjust item you select. 5. Press EXIT button may back previous menu. 6.
BUFFALO FTD-G931AS/BK Main Menu Item Sub Menu Item Sub Menu Icon Auto Auto adjust color Recall Color Temperature from Color Temp Color Description EEPROM Red Setting Red Gain from Digital-register Green Setting Green Gain from Digital-register Blue Setting Blue Gain from Digital-register Volume Audio adjustment Mute Audio prohibition Sound OSD language selection OSD language (English or Japanese) Adjust the horizontal position of OSD H-Position the OSD Adjust the vertical position of
BUFFALO FTD-G931AS/BK 4. INPUT/OUTPUT SPECFICATION 4.1 INPUT SIGNAL CONNECTOR PIN NO. DESCRIPTION PI N NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Detect Cable 3. Blue 11. NC 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground VGA Connector layout 1 5 6 10 11 15 4.
BUFFALO FTD-G931AS/BK 1280x960@60Hz 1800x1000 60 P 60 P 108 1280x1024@70Hz 1720x1064 74.4 P 70 P 124.9 1280x1024@72Hz 1724x1066 77.9 P 72 P 134.6 IBM MODES Horizontal Nominal Mode Resolution Total Vertical Sync Frequency Polarity +/- 0.5kHz Nominal Freq. +/- 1 Hz Nominal Sync Pixel Polarity Clock (MHz) DOS* 720x400@70Hz 900 x 449 31.469 N 70.087 P 28.322 DOS 640x350@70Hz 800 x 449 31.469 P 70.087 N 25.175 MAC MODES VGA SVGA 640x480@67Hz 864x525 35.
BUFFALO FTD-G931AS/BK 4.4 Panel Specification 4.4.
BUFFALO FTD-G931AS/BK 4.4.2 Optical Characteristics 4.4.
BUFFALO FTD-G931AS/BK 13
BUFFALO FTD-G931AS/BK 5. SOFTWARE FLOW CHART (1) 1. Initialize MCU settings, including I/O, Timer, ISR and Serial Port settings. (2) 2. Read EEPROM content to recover monitor settings, including brightness, contrast, color temperature and OSD (3) position etc. 3. Initialize system variable, including system flag, OSD (4) timeout counter, burin mode status… etc. (5) 4. Initialize OSD menu variable for user operation Y N (6) 5.
BUFFALO FTD-G931AS/BK 6.
BUFFALO FTD-G931AS/BK 7.Trouble Shooting 7.1 Main board No power No power Press power key and look if the picture is normal NG OK OK Please reinsert and make sure the AC of 100-240 is normal OK Reinsert or check the power section NG Measure U201 PIN2=1.8V U202 PIN2=3.3V OK Check Correspondent component. NG X401 and X601 oscillate waveforms are normal OK Check Correspondent component.
BUFFALO FTD-G931AS/BK No picture The button if under control X601 oscillate NG waveform is normal OK OK Measure U202 PIN2=3.3V NG U201 PIN2=1.8V OK NG Replace U601 Check Correspondent component X401 oscillate waveform is normal OK NG Check Correspondent component. Replace U401 White screen 17 NG Check Correspondent component.
BUFFALO FTD-G931AS/BK White screen Measure Q204 base is high level? OK Measure U202 PIN2=3.3V NG U201 PIN2=1.8V OK Check Q203 is broken or CN503 solder? Check Correspondent component NG Check Correspondent component X401 oscillate waveform is normal NG NG OK OK Replace PANEL Replace U401 7.
BUFFALO FTD-G931AS/BK No power Check AC line volt 110V or 220V NG Check AC line OK Check the voltage of C905(+) OK NG Check F901, bridge rectified circuit Check start voltage for the pin3 of IC901 NG Check R906, R907, IC901 OK Check the auxiliary voltage is between 10V-16V OK NG 1) Check IC901,T901 2) Check ZD901 3) Check D902/D903 Check D910, D911, IC902 No Backlight Check C223 (+) =12V 19
BUFFALO FTD-G931AS/BK Check F902 NG Check D201/Q209/Q210 OK Check D202/Q211/Q212 Check ON/OFF signal NG Check Interface board OK Check U201 pin9=12V voltage NG Change Q201 or Q202 OK Check the pin10/Pin7 of U201 have saw tooth NG Short Q203/Q204 if the picture normal OK Replace U201 NG Connect PIN15 of U201 to the ground and check Q209/Q210/Q211/Q212 collector waveforms NG 1) Replace Q209/Q210/PT201 OK 2) Replace Q211/Q212/PT202 Check feedback circuit NG Check connecter & lamp 20
BUFFALO FTD-G931AS/BK 8.Schematic 8.1 Main Board TSU16/56AK SCHEMATIC B2 B1 TXD RXD DDC_CLK DDC_DAT ST_DET1 RIN GNDR GIN GNDG SOG BIN GNDB HSYNC VSYNC RIN GNDR GIN GNDG SOG BIN GNDB HSYNC VSYNC VCC1.8 DVI_DET VCC3.3 VAA1 VAA2 VAA3 VAA4 VCC1.8 DDCCI_SEL VCC3.3 R+ RG+ GB+ BCLK+ CLKDDC_WP R+ RG+ GB+ BCLK+ CLK- VAA1 VAA2 VAA3 VAA4 3.INPUT B3 DDCCI_SEL DVI_DET DDC_WP ST_DET1 DDC_CLK CSZ DDC_DAT SCL RXD SDA TXD HWRESET INT VCPU VCC12V VCC5V AD0 AD1 AD2 AD3 VCC5V VCC12V VCPU VCPU VCC12V VCC3.
BUFFALO FTD-G931AS/BK VCC5V+ VCC5V SOT-252 U201 D202 6 CN201 10K R201 4.7K 1/16W 3 1/16W VI C210 D201 SS14 C201 VCC5V+ VCC5V VCC5V R212 4.7K B Q201 PMBS3904 0.1uF 3,4,6 VO 0.1uF 1/16W VCC1.8 2 VCC1.8 C211 4 C212 + 47uF/16V 0.1uF 1 ON_OFF DIM VCC12V GND VCC5V GND 2 4 6 8 10 12 C 1 3 5 7 9 11 AZ1117D-1.
15 D323 TZMC5V6-GS08 NC 1/16W R301 33 1/16W C304 0.047uF 0 1/16W R302 33 1/16W C305 0.047uF FB303 0 1/16W R303 33 1/16W C306 0.047uF R304 470 R305 68 1/16W C308 0.047uF R306 68 1/16W C309 0.047uF R307 68 1/16W C310 0.047uF PC5V VGA_CON R325 C301 1/16W NC 75 C302 NC D301 BAV99 3 TZMC5V6-GS08 NC 3 3 4/2/2004-Add R329,R330 D302 BAV99 RIN 1/16W C307 0.
BUFFALO FTD-G931AS/BK VCC3.3 FB401 2 VCC3.3 VPO 2 600 OHM 3 3 3 3 3 3 3 3 VDVI R+ RG+ GB+ BCLK+ CLKR403 390 1/16W 40 41 43 44 46 47 49 50 52 66 C401 0.1uF 67 RIN0 RIN0M GIN0 GIN0M SOGIN0 BIN0 BIN0M HSYNC0 VSYNC0 DDC1_CLK/GPO8 DDC1_DAT/GPO7 VCC1.8 VDD 600 OHM C414 10uF/16V + VDD + C406C407C408C409C410C411C412C413 0.1uF0.1uF0.1uF0.1uF0.1uF0.1uF0.1uF0.1uF C415C416C417C418 0.1uF0.1uF0.1uF0.
BUFFALO FTD-G931AS/BK 4 4 PA[0..9] PB[0..9] PA[0..9] PB[0..
BUFFALO FTD-G931AS/BK VCPU 2 VCPU RST 2 D601 20 10 4 1/16W 12 14 INT 33 32 17 2 3 4 5 6 7 8 9 VCPU C605 0.1uF 1 2 3 4 R604 10K R605 10K U602 A0 A1 A2 GND VCC WP SCL SDA 8 7 6 5 R652 10K 1/16W R639 R638 AT24C16N-10SC-2.7 CN601 1/16WR608 1/16WR609 100 NC FB602 600 OHM R627 R626 VCC12V 2 VCC5V 2,3,4 CONN 0.1uF 0.1uF 1/16W 1/16W NC P1.0 P1.1 P1.2 I/O P1.3 P1.4 P1.5 P1.6 P1.7 XTAL1 XTAL2 RESET P6.0 P6.1 P6.2 P6.3 P6.4 P6.5 P6.6 P6.7 T0/P3.4 P7.6/CLKO INT1/P3.3 P7.7 NC INT0/P3.
BUFFALO FTD-G931AS/BK R919 47_1/2W_M C913 102P_500V +12V + 1 D910 SRF20100C BD901 U4KB8R 3 2 R906 1M/1206 C905 100uF/450V R907 1M/1206 C906 152P/1KV R905 1M/1206 2 1 + C908 0.1U_50V 4 FR107 1 + D911 SRF20100C 8 O7 D901 3 L902 R903 100K_2W D902 PS102R 4 - + R904 1M/1206 L903 73L-253-91L T901 TRANSFORMER 4 O 12 11 + F902 5A/24V/1206 V12A 2 R920 47_1/2W_M + C914 C915 1000UF/16V 1000UF/16V C916 470UF/16V C917 0.
BUFFALO FTD-G931AS/BK J201 2 TP1 HVO 1 TP3 HVL 1 TP4 HVL 1 CN201 1 JUMPER1 Q203 V12A C202 0.1uF/25V 3 AA 1 C225 1uF/25V Q202 R214 R212 3.9K 2.2K 1/16W 1 2 3 + C201 4 470uF/16V 8 7 6 5 L201 120UH D201 SM240A AO4411 D203 BZT52 R224 1K 5 PT2019 4 3 2 C213 0.22uF/160V 2 6 1 C203 1uF/25V R208 4.
BUFFALO FTD-G931AS/BK FB105 150OHM SPKR_L+ CN103 1 2 SPKR_LFB106 150 OHM 56p 56p GND SPKR_R- CONN C109 56p 7 CN102 PHONEJACK C101 56p GND 5 FB104 150 OHM 6 4 C110 3 2 HP/SPKR# FB101 150 OHM HP_R 56p C102 1 C111 SPKR_R+ 1 2 CONN C112 FB103 150 OHM CN104 GND GND C103 56p GND 56p FB102 GND GND 150 OHM HP_L C104 C105 56p 56p GND GND GND CN101 KEY_SEL KEY_LEFT POWER_ KEY KEY RIGHT KEY_MANU C122 LED ORANGE LED_BLUE C124 0.1uF GND SW101 SW102 SW103 0.
BUFFALO FTD-G931AS/BK ROUT+ ROUT- CN102 4 3 2 1 ROUTROUT+ LOUTLOUT+ C127 PHONE_RIGHT C125 CN103A WAFER 4P2.0 R/A C126 0.001uf/50v R104 PHONE_RIGHT NC 0.001uF/1nf PHONE_LEFT 0.001uF/1nf L103 300 OHM +12V C124 GND +12V 10uF VCC WAFER 4P2.0 R/A L104 300 OHM GND + GND 4 3 2 1 MODE C121 AVDD C122 PHONE_RIGHT PHONE_LEFT VCC DELETE R122 120K C120 0.1uF/100nf 0.1uF/100nf 0.01uF/10nf C123 0.01uF/10nf J101 3 4 2 1 MODE + R126 0K C109 1.
BUFFALO FTD-G931AS/BK 9.BOM LIST The different parts of T980KA4NJSB1A & T980KA4NJSB2A Part No.
BUFFALO FTD-G931AS/BK 40G 58162435A LABEL 1 PCS 40G 581689 4A SERIAL LABEL FOR MONITO 1 PCS 40G 581894 2A BLUE DOT 2 PCS 41G7800894 4A INSTALL MANUAL 1 PCS 44G3231 15 EVA WASHER 1 PCS 44G3231 15506 EVA WASHER 1 PCS 44G3910 5 U TYPE SHEET 1 PCS 44G3920 1 EPS(L) 1 PCS 44G3920 2 EPS(R) 1 PCS 45G 76 28 V3 PE BAG FOR MANUAL 1 PCS 45G 88626 1 PE BAG FOR MONITOR 1 PCS 50G 600 2 HANDLE1 1 PCS 50G 600 3 HANDLE2 1 PCS 52G 1186 SMALL TAPE 8 CM 52G 1207 A ALUMI
BUFFALO FTD-G931AS/BK C103 65G0603104 12 CER2 0603 X7R 16V 100N 1 PCS C105 65G0603105 17 1UF 16V Y5V 1 PCS C106 65G0603105 17 1UF 16V Y5V 1 PCS C107 65G0603105 17 1UF 16V Y5V 1 PCS C108 65G0603105 17 1UF 16V Y5V 1 PCS C109 65G0603105 17 1UF 16V Y5V 1 PCS C110 65G0603105 17 1UF 16V Y5V 1 PCS C111 65G0603105 17 1UF 16V Y5V 1 PCS C112 65G0603103 32 0.
BUFFALO FTD-G931AS/BK L113 71G 59B121 TB160808B 1 PCS L114 71G 59B121 TB160808B 1 PCS R106 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS R107 61L0603124 CHIP 120KOHM 1/10W 1 PCS R110 61L0603102 RST SM 0603 RC0603 1K P 1 PCS R112 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS R113 61L0603682 CHIP 6.
BUFFALO FTD-G931AS/BK CN301 88G 35315F H D-SUB 15PIN 1 PCS CN503 33G802724B H WAFER 1 PCS CN601 33G8027 14 WAFER 14P 2.0MM DIP DUA 1 PCS CN602 33G8027 16 WAFER 16PIN 2.0mm DIP 1 PCS X401 93G 22 53 CRYSTAL 14.318MHzHC-49U 1 PCS X601 93G 22 45 H 24MHZ/30PF/49US 1 PCS 40G 457624 1B LABEL-CPU 1 PCS 715L1423 1512 PCB 1 PCS C201 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C203 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C205 65G0603104 32 CHIP 0.
BUFFALO FTD-G931AS/BK C413 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C415 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C416 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C417 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C418 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C420 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C421 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C423 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C425 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C426 65G0603104 32 CHIP 0.
BUFFALO FTD-G931AS/BK D323 93G 39147 TZMC5V6 1 PCS D324 93G 6433P BAV99 SOT-23 1 PCS D601 93G 6432V LL4148-GS08 1 PCS FB202 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS FB301 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS FB302 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS FB303 61L0603000 RST SM 0603 JUMP MAX 0R 1 PCS FB304 71G 59B431 BK1608 HW 431 1 PCS FB401 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS FB402 71G 56Z601 CHIP BEAD 600 OHM 0805 1 PCS FB403 71G 56Z601 CHIP BEAD
BUFFALO FTD-G931AS/BK R305 61L0603101 RST SM 0603 RC0603 100R 1 PCS R306 61L0603101 RST SM 0603 RC0603 100R 1 PCS R307 61L0603101 RST SM 0603 RC0603 100R 1 PCS R308 61L0603103 RST SM 0603 RC0603 10K 1 PCS R309 61L0603101 RST SM 0603 RC0603 100R 1 PCS R310 61L0603102 RST SM 0603 RC0603 1K P 1 PCS R311 61L0603102 RST SM 0603 RC0603 1K P 1 PCS R312 61L0603101 RST SM 0603 RC0603 100R 1 PCS R313 61L0603222 RST SM 0603 RC0603 2K2 1 PCS R314 61L0603222 RST SM 0603 RC0
BUFFALO FTD-G931AS/BK R613 61L0603103 RST SM 0603 RC0603 10K 1 PCS R614 61L0603103 RST SM 0603 RC0603 10K 1 PCS R615 61L0603103 RST SM 0603 RC0603 10K 1 PCS R616 61L0603472 RST SM 0603 RC0603 4K7 1 PCS R617 61L0603121 CHIPR 120 OHM 1/10W 1 PCS R618 61L0603121 CHIPR 120 OHM 1/10W 1 PCS R619 61L0603472 RST SM 0603 RC0603 4K7 1 PCS R620 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS R621 61L0603471 CHIPR 470 OHM+-5% 1/10W 1 PCS R622 61L0603471 CHIPR 470 OHM+-5% 1/10W 1
BUFFALO FTD-G931AS/BK GND1 95G 900 57 WIRE HARNESS 1 PCS GND2 95G 900 57 WIRE HARNESS 1 PCS SW101 77L 600 1GHJ KEY SWITCH 1 PCS SW102 77L 600 1GHJ KEY SWITCH 1 PCS SW103 77L 600 1GHJ KEY SWITCH 1 PCS SW104 77L 600 1GHJ KEY SWITCH 1 PCS SW105 77L 600 1GHJ KEY SWITCH 1 PCS 715L1205 1 KEPC 1 PCS C101 65G0603560 31 CHIP 56PF 50V NPO 1 PCS C102 65G0603560 31 CHIP 56PF 50V NPO 1 PCS C103 65G0603560 31 CHIP 56PF 50V NPO 1 PCS C104 65G0603560 31 CHIP 56PF 50V
BUFFALO FTD-G931AS/BK C215 65G 3J2206ET 22PF 5% SL 3KV TDK 1 PCS C216 65G 3J2206ET 22PF 5% SL 3KV TDK 1 PCS C217 65G 3J2206ET 22PF 5% SL 3KV TDK 1 PCS C218 65G 3J2206ET 22PF 5% SL 3KV TDK 1 PCS C223 67G215V471 3N GP KY16VB470M-CC3 10*12.5 1 PCS C902 65G305M1022EM Y2 1000PF +-20% 250VAC 1 PCS C903 63G 107474 HS 0.47UF +-20% 275VAC 1 PCS C904 63G 10722410M 0.
BUFFALO FTD-G931AS/BK R226 61G 208102 64 1KOHM 5% 1W 1 PCS R228 61G 208102 64 1KOHM 5% 1W 1 PCS R230 61G 208102 64 1KOHM 5% 1W 1 PCS T901 80LL19T 3 TG TRANSFORMER 1 PCS PWPC1942AUM2AI POWER BOARD FOR AI 1 PCS C102 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS C107 65G0805104 32 CHIP 0.1U 50V X7R 1 PCS C112 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C114 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C115 65G0603104 32 CHIP 0.1UF 50V X7R 1 PCS C202 65G0805104 22 0.
BUFFALO FTD-G931AS/BK L308 71G 59B601 EA CHIP BEAD 600 OHM 1 PCS L309 71G 59B601 EA CHIP BEAD 600 OHM 1 PCS Q101 57G 763 3 AO4411 SO-8 1 PCS Q102 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS Q103 57G 417 6 PMBS3906/PHILIPS-SMT(06 1 PCS Q201 57G 760 5A DTC 144WN3/S SOT-23 1 PCS Q202 57G 760 4B PDTA144WK SOT346 1 PCS Q203 57G 763 3 AO4411 SO-8 1 PCS Q204 57G 763 3 AO4411 SO-8 1 PCS Q205 57G 417 4 PMBS3904/PHILIPS-SMT(04 1 PCS Q206 57G 417 4 PMBS3904/PHILIPS-SMT(0
BUFFALO FTD-G931AS/BK R908 61L1206519 CHIPR 5.1OHM +-5% 1/4W 1 PCS R910 61L1206000 RST SM 1206 JUMP MAX 0R 1 PCS R911 61L0805240 2F CHIP 24KOHM 1% 1/8W 1 PCS R912 61L0805203 CHIPR 20KOHM +-5% 1/8W 1 PCS R916 61L0805472 CHIRP 4.7K OHM +-5% 1/8 1 PCS R917 61L0805101 CHIPR 100 OHM +-5% 1/8W 1 PCS R918 61L0805472 CHIRP 4.
BUFFALO FTD-G931AS/BK D210 93G 64 1152T 1N4148 1 PCS FB101 71G 55 29 FERRITE BEAD 1 PCS FB901 71G 55 29 FERRITE BEAD 1 PCS IC903 56G 158 4 T H431BA 1 PCS L901 6G 31502 1.5MM RIVET 4 PCS L902 6G 31502 1.5MM RIVET 4 PCS NR901 6G 31502 1.5MM RIVET 2 PCS PT201 6G 31502 1.5MM RIVET 2 PCS PT202 6G 31502 1.5MM RIVET 2 PCS R111 61G 21015352T 15KOHM 1% 1/6W 1 PCS R112 61G 60227252T 2.
BUFFALO FTD-G931AS/BK T901 6G 31502 1.5MM RIVET 4 PCS R903 61G152M10458F 100K OHM 5% 2W 1 PCS 90G 415 1 HEATSHINK FOR Q901 1 PCS M1G1730 8128 SCREW M3x8 1 PCS 57G 724 4A STP9NK60ZEP 1 PCS 96G 29 6 SHRINK TUBE UL/CSA 1 PCS R914 61G 2J22858H 0.
