User manual

5
HD-HSQ User Manual
Dismounting the DriveStation
For Windows
■
For USB/ FireWire
Unplugging the DriveStation incorrectly can corrupt data. Please be careful! If your computer is turned
o, then it is always safe to unplug the DriveStation.
If your computer is turned on, please follow the procedure below to unplug your DriveStation. This
example shows Vista, but other versions of Windows are similar.
1
Click the icon (Windows 7/ Vista) / (Windows XP) in the systray.
2
When the menu opens, click the device name.
USB
OS Device name
Windows 7 "Eject BUFFALO INC.USB-SATA Bridge"
Windows Vista/XP "Safely remove USB Mass Storage Device – Drive (E:)"
FireWire
OS Device name
Windows 7 "Eject BUFFALO_INC. HDD"
Windows Vista/XP "Safely remove BUFFALO INC. HDD IEEE1394 SBP2 Device – Drive (E:)"
Note:
If TurboPC is enabled, "TurboPC" may be part of the device name.
3
A message that indicates you can safely remove the unit will appear. Click [OK] and
unplug the DriveStation.
Note:
You do not have to click [OK] if your OS is Windows 7 or Windows XP. The message will
automatically disappear.