User manual

23
WBR-G54 User Manual
4.4.8 Syslog transmitting
Select Use or Do not use to enable or disable the
AirStation’s ability to transmit information to a Syslog
server.
• Syslog Server - Enter the IP address of the Syslog
server.
• Log Information Level - Select Error and/or
Notice to specify the types of reports to be sent to
the Syslog server.
• Log Information - Select the specifi c reports to
be sent to the Syslog server.
■ Note: A server running a Syslog service is required
for this.
4.4.9 Save/Restore Settings
Save current settings - Click Save to open the
fi le saving dialog and save current AirStation settings
to a fi le.
Restored saved settings - Restores settings
from a fi le that has been saved. Click Choose fi le to
select the saved fi le and click Restore.
■ Note: If the setting fi le is saved by a newer
fi rmware than the current one, the AirStation can’t
restore the settings.
4.4.10 Initialization/Reboot
Click Restart to reboot AirStation
Click Restore to reset the AirStation to default
factory settings.
■ Note: Resetting to default factory settings will
erase all settings and passwords previously entered.
4.4.11 Firmware Update
Firmware file name - Click Choose
fi le to browse the path and fi lename for new
fi rmware. Click Firmware Update to load
fi rmware to the AirStation.
■ Note: Firmware update does not erase cur-
rent user settings.
■ Note: Firmware Updates can only be performed by the recommended Web Browsers below on the Macintosh.
OSX - The AirStation can be updated using Netscape v7 or Apple’s Safari Web browser v1.0 or later.
OS9 - The AirStation can be updated using Netscape v4.5 or later or Internet Explorer 4.5 or later.
4.4.12 Logout - This feature logs administrator out of the AirStation web interface. Only one user at a time can
configure the AirStation with the web interface.
Figure 4.4.8
Syslog
transmitting
Screen
Figure 4.4.9
Save/Restore
Settings
Screen
Figure 4.4.10
Initialization/
Reboot
Figure 4.4.11
Firmware
Update