User manual

21
WBR-G54 User Manual
4.4 Management
(Network Diagnosis Settings)
4.4.1 System information
System information of the AirStation is obtained
here.
• Model name
- Displays model and fi rmware
version
• AirStation Name
- Displays AirStation host
name
• DHCP Server function
- Displays On or Off
• Wireless
- Displays the wireless LAN settings such
as wireless MAC address and wireless fi rmware.
• LAN
- Displays the AirStation LAN settings
• WAN
- Displays the AirStation WAN settings
• Default Gateway
- Displays default gateway
settings
•
WAN side IP address auto acquisition
- This is the method to acquire the IP address from
the WAN (Internet) side DHCP server.
4.4.2 Name and Password
AirStation name - When using multiple AirSta-
tions, select a unique name to make it easier to
identify each AirStation.
Administrator name - “root”, cannot be
changed
Administrator password - Allows the adminis-
trator to enter an administrator password to restrict
access to the setting screens.
• New Password - Enter new password. Enter up
to eight alphanumeric characters (case sensitive)
• Confi rm Password - Reenter the new password
for confi rmation
4.4.3 Time setup
Time setup - Enter the current date and time,
and click Set.
NTP - Network Time Protocol. Select Use or Do
not use.
■ Note: If NTP is used, time is set au to mat i cal ly.
NTP server name - Enter the NTP server
name
Check Interval - Enter the time interval for time
check frequency
Time Zone - Select local time zone
Click Set.
Figure 4.4.1
System
Information
Figure 4.4.2
Name and
Password
Setup
Figure 4.4.3
Time Setup
Screen