User manual

ThisAirStationsupportsquicklychangingtheproductfromafullwirelessroutertoasimple

accesspoint.

PutyourAirstationintoAccessPointModebymovingthe“ROUTER”switchonthebottomof

yourAirStationfromONtoOFF.ThischangesthedefaultIPaddressoftheAirStationfrom

192.168.11.1to192.168.11.100,andDHCP,NAT,andtheWANportaredisabled.Allrouter

functionalityisdisabled,andtheWHR-G300Nbecomesasimpleaccesspoint.

WiththeswitchintheAUTOposition,theAirStationservesasa5portswitch,withIP

addressinghandledbyanexternalUPnPDHCPserver.YouwillneedanexternalUPnP

DHCPservertousethismode,ormanuallyassignallIPaddresses.

TousetheAirStationasanormalwirelessrouter,thisswitchmustbethe(ON)position.

Router/Access Point Mode