Quick Setup Guide - AirStation Draft-N WZR-G300N Nfiniti Wireless Router & AP Package Contents • WZR-G300N AirStation • Base Stand • AC Adapter and Power Cable • CAT5 LAN cable • Utility CD with Manual • Quick Setup Guide • Warranty Statement www.buffalotech.com v1.
Step 1: Connect Your Equipment 1. Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem. 2. Connect the Ethernet cable from your cable or DSL modem to the WAN port on your AirStation. The WAN port is the port closest to the power connector. This is the only port that will work for your internet connection. 3. Connect one or more PCs or workstations to any of the four LAN ports on the AirStation with RJ-45 Ethernet cables. 4.
Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. We recommend that you use a wired computer that is plugged into the AirStation with an Ethernet cable for initial configuration. 1. Launch the web browser on the computer that you’re going to use to configure the AirStation. NOTE: The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server. 2.
Step 3: Configure Wireless Settings A. From a web bowser or a PC on the network, log in to the AirStation Configuration Utility. Open a web browser, type http://192.168.11.1 into the address field and press Enter. Enter root as the User name and leave the password field blank. This will take you to the Home page, where you can click on the System Info tab. B. The System Info page gives you all the current information for your AirStation.
Step 3: Configure Wireless Settings C. The Wireless Settings (Advanced -> Wireless -> 802.11n) page allows you to control important aspects of your Wireless Router/AP: SSID - The SSID is the name of your wireless network. This is what you see when performing a wireless scan or survey from a wireless client. You might want to change this to something easy to recognise, like “MYNETWRK”. Channel Selection - You may find it necessary to change the AirStation’s channel to avoid interference with other 2.
Alternative Step 3: Configure Wireless Settings with AOSS AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is simple. A. Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash amber. B.
Congratulations! Your AirStation is installed and the basic setup has been configured. For advanced settings and more detailed information, consult the User Manual, located on your AirNavigator CD-ROM. Technical Support: North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 | Email: info@buffalotech.
