Operating instructions

ManualsBrandsBuffalo Tools ManualsSawIW12BX

DWHOIST

Drywall Hoist

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual provides important information on proper operation and maintenance. Every effort has

been made to ensure the accuracy of this manual. We reserve the right to change this product at any

time without prior notice.

STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS.

DO NOT RETURN THIS PRODUCT TO THE RETAILER.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy

of the sales receipt is required.

Summary of content (12 pages)

PAGE 1
DWHOIST Drywall Hoist Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! CONTACT CUSTOMER SERVICE WITH QUESTIONS OR PROBLEMS. DO NOT RETURN THIS PRODUCT TO THE RETAILER.
PAGE 2
TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS ........................................................................ 2 GENERAL PRODUCT SPECIFICATIONS .................................................................................................. 3 FEATURES ................................................................................................................................................. 3 PACKAGE CONTENTS.......................................................................
PAGE 3
GENERAL PRODUCT SPECIFICATIONS FEATURES • All Welded Steel Construction • Rolling Casters PACKAGE CONTENTS Tripod Base Frame Assembly Cradle Assembly 2-pieces Crossarm Assemblies SPECIFICATIONS • 150 Lb Max Capacity • Sheet Quantity Capacity – 1 piece MAX • Holds Panels Up To 4 feet x 16 feet MAX • Raises up to 11 Feet High MAX • Loading Height 34 Inches KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
PAGE 4
IMPORTANT SAFETY RULES COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. Keep the work area clean and well lit. A cluttered work area may cause accidents. Never allow children to use this product without responsible adult supervision. When operating this product, keep children at a safe distance from the work area. Wear suitable clothing. Do not wear loose clothing or jewelry. They may get caught in moving parts.
PAGE 5
COMPONENTS Cradle Assembly Cradle Crossarm Read & Obey All Warning Labels Cradle Crossarm Winch Handle Winch Wheel Telescoping Sections Housing Frame Assembly Backstop Tripod Base Assembly OPERATION Maximum weight usage is 150 pounds. Do not lift beyond that load. Inspect the unit carefully before use. Determine that the cable is not kinked, frayed or damaged. Drywall Hoist should be at room temperature when in use.
PAGE 6
OPERATION (Continued) Unpack product from package and review contents. Keep all packaging until product has been reviewed. This product should be inspected prior to use to make certain all parts are intact and safe to use after assembly. ASSEMBLY Keep the work area clean and well lit. A cluttered work area may cause accidents. Never allow children to use this product without responsible adult supervision. When operating this product, keep children at a safe distance from the work area.
PAGE 7
. Attach cradle to the frame, by inserting the post into the opening on top of the frame. 8. Attach the cradle to the frame by snapping the tilt latch upward so it hooks over the stud. 9. Slide the tapered plates on the crossarms into the tapered sockets on the cradle. 10. Press each crossarm forward into the socket until the spring tab on the bottom of the crossarm snaps into place.
PAGE 8
PRODUCT USAGE Slide the yoke ring to unlatch the two forward legs so the can be rotated out to the lift’s working position or in to its storage position. A spring-loaded pin snaps into a hole on the bottom of the slide tube, to lock the legs. To prevent the base from rolling, move the backstop up or down. (Figure J) The outriggers extend to support a longer drywall panel. Figure J Pull out the lock pin (Figure K) until you can slide the outrigger with your left hand.
PAGE 9
Raise the backstop on the base, and carefully roll the lift close to the position where the panel will be installed. To Raise The Panel Always lower the backstop before raising the panel to a sloped ceiling or side wall. Hold the post for leverage and crank the winch wheel. The brake is spring-loaded to automatically hold the cradle at the selected height when you stop cranking. To Lower The Panel Hold the wheel handle so you can support the backward rotation of the winch.
PAGE 10
MAINTENANCE Before and after using this tool, check the cable. Occasionally oil the cable sheaves and caster bearings. Crank up the telescoping sections for access to the internal cable pulley. If the telescoping sections of the frame don’t operate smoothly, apply household paraffin to the sliding surfaces for smoother action. Some chemicals can damage the product. Do not use harsh chemicals such as gasoline, carbon tetrachloride, paint thinner, etc. to clean this product.
PAGE 11
PARTS DIAGRAM DWHOIST Drywall Hoist Assembly & Operating Instructions 11
PAGE 12
PARTS LIST # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Name Crossarm Cradle Mounting Head Body Screw Hinge Pin Spring Washer Washer Tension Spring Support Hook Hook Clamp Screw Yoke Pin Tension Spring Nut Yoke Pin Braket Screw End Cap Outrigger Clip Tension Spring Lock Pin Slide Bar Lock Nut Slide Bar Aircraft Cable, 1/8" Outer Mast Rubber Grip Winch Post Rivet Bolt Shaft Brake Hub Brake Arm Spring Qty # Name 2 1 1 1 1 2 2 2 2 2 2 1 1 2 1 2 8 2 2 2 2 1 1 1