Operating instructions

AWELD160 ARC Welder Assembly & Operating Instructions
2
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
What You Need to Know About Safety Instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible
conditions and situations that may occur. Common sense, caution and care must be exercised when
assembling or using this product.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you
do not understand.
GENERAL PRODUCT SPECIFICATIONS
Dimensions 14 ½” x 9 3/4” x 10”
Welding Current 55 ~ 160 Amps (AC operation)
Absorbed Power 5.4 Kilowatts
Power Requirement 230 VAC, single phase, 60 hz
Duty Cycle 10% @ 160 Amps (AC)
Power Consumption 230 VAC/ 60 Hz / Single Phase
Open Circuit Voltage 48 VC
Thermal Overload Protection AC setting: 10 minutes shutdown; 3 minutes back on
Cables Ground: 4 AWG, single insulation, 6’.........Torch: 4 AWG, single insulation, 6’
Accessories Handle / Wire Brush /Face Shield
Weight 39.6 lbs
WARNING! Always wear eye, hearing, and breathing protection!
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.