HS-DTGL/R5 TeraStation User Manual

22
11. Diagnostic LED–TheDiagnosticLEDmay
ashwhentheTeraStationencountersanerror.
Inthisevent,pleasecontactour24/7technical
support at [phone] (USA & Canada
only; see page 71 for European tech support
information).
12. Power – This LED glows a steady green
whiletheTeraStationisoperatingnormally.It
blinks quickly during bootup and shutdown,
and slowly while the TeraStation is in sleep
mode.
13. Link/Act – This LED will glow when the
TeraStationisconnectedtoanetwork,andblink
during normal network activity. It changes color
to indicate the speed of the connection:  blue
fora1000Mbpsconnection,greenfor100Mbps,
andredfora10Mbpsconnection.
14. Power Socket–Plugthepowercordinto
this socket.
15. Power Switch – This is the TeraStation’s
masterpowerswitch.Whileitison,thepower
buttononthefrontpaneloftheTeraStationmay
beusedtostartandshutdowntheunit.When
thisswitchisoff,nopowergoestotheunit.If
thisswitch isleftofffor anextendedperiodof
time, the TeraStation’s internal system clock
mayneedtobereset.
16. Internal Fan–Theinternalfanwilladjust
itsspeedaccordingtothetemperatureinsidethe
TeraStation.  To prevent possible overheating,
keep the fan clear and clean of obstacles or
dust.
17. INIT Button – The INIT button restores
your TeraStation to factory default settings. See
page54formoreinformationonusingtheINIT
button.
TeraStation Diagram