USB Print Server User Manual LPV2-USB-TX1

The ‘Additional Port Information Required’ window will appear. Select

‘Standard’ device type and select ‘Generic Network Card’ from the pull

down menu. Press the ‘Next’ button when ﬁnished.

A summary screen will appear. Press the ‘Finish’ button to continue

setting up your USB Network Printer.

The ‘Install Printer Software’ window will appear. Please select the

proper printer from the list below, or refer to the printer manufacturer’s

driver location. Once the proper printer driver has been selected,

press the ‘Next’ button.

NOTE: Press the ‘Have Disk’ button to install drivers from a CD-ROM

or Floppy disk.