- Buffalo Wireless Router Quick Setup Guide
3
Step 2: Configure Your Router
Next, you need to congure your router. This is done from a web browser on a computer
connected to the router.
A. Launch the web browser on the computer that you’re going to use to congure the
AirStation. The computer used to congure the AirStation should be set to obtain an IP address
automatically using a DHCP server.
B. Your web browser should automatically load a web page. If the default web page loads
successfully, then the AirStation has automatically congured your Internet connection settings.
Please skip to the next page if you have successfully connected to the Internet.
C. If the AirStation cannot automatically congure itself
for your Internet connection, then a window will open,
prompting you to enter a User ID and Password.
Enter root as the User name and leave the password eld
blank.
Note: If your web browser doesn’t automatically open the
password dialog box, then type 192.168.11.1 in its address
eld, and press Enter.
D. The AirStation will provide different conguration
options depending on what it has auto-detected. Please
enter any requested account information. This information can be obtained from your Internet
Service Provider; contact them for account specic information.