User manual

Chapter 3 Connect to a Wireless Network
WLI-UC-GNHP User Manual 21
This screen will be displayed.
4
Connect your computer to the wireless router with a wired Ethernet cable. Log in to the
wireless router’s conguration utility and navigate to its WPS page. If your router is a Bualo
AirStation, then the WPS page will be under the Wireless Cong tab.
5
Enter the PIN code you wrote
down in step 6.
When the message "Connection has been Completed” is displayed in Client Manager 3, you may
disconnect the Ethernet cable. Your computer is now connected to the network wirelessly.
Example: If the access point you are
trying to connect is a Bualo AirStation,
enter the PIN code in “Enrollee PIN” and
click “OK”.