User manual
Chapter 3 Connect to a Wireless Network
WLI-UC-GNHP User Manual 19
8
Connect your computer to the wireless router with a wired Ethernet cable. Log in to the
wireless router’s conguration utility and navigate to its WPS page. If your router is a Bualo
AirStation, then the WPS page will be under the Wireless Cong tab.
9
Enter the PIN code you wrote
down in step 6.
If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location” depending
on where the AirStation will be used. When the message "Connection has been Completed” is
displayed in Client Manager V, you may disconnect the Ethernet cable. Your computer is now
connected to the network wirelessly.
Example: If the access point you are
trying to connect is a Bualo AirStation,
enter the PIN code in “Enrollee PIN” and
click “OK”.