User manual

WLI-UC-G300N / WLI-UC-AG300N User Manual 63
Appendix
300 Mbps Mode settings
By default, the AirStation’s 300 Mbps mode is disabled. Use the following proceedure to enable it if
desired.
1. Click “
Start”
> “All Programs” > “BUFFALO” > “AirStation Utility” > “AirStation Bandwidth 20 or
40MHz Select Tool” and launch the utility software.
If you are using Windows Vista and see the message "A program needs your permission to
continue", click “Continue”.
2. When the message "Now start the setup wizard of Bandwidth Select Tool" is displayed, click
“
Next”
.
3. Click “Next”.
4. When the message "Select wireless adapter" appears, select this unit and click “Next”.
5. Select "Use 300Mbps Mode (40MHz)", and click “
Next”
.
6. When the message "Wireless adapter setting is completed" is displayed, click “Exit to setup”.
If you still cannot establish a 300 Mbps connection, check the settings for your access point.