User manual
Chapter 3 Connect to a Wireless Network
WLI-UC-G300N / WLI-UC-AG300N User Manual 21
This screen will be displayed.
4
Use a computer with a wired Ethernet connection to log in to the access point. The screen to
enter the PIN code will be displayed.
Note: If the access point you are trying to connect is a Bualo AirStation, click “Wireless Cong” > “WPS” on the
TOP of the conguration screen. The screen to enter the PIN code will be displayed.
5
On the conguration screen of
the access point, enter the PIN
code you wrote down in step 2.
Follow the instructions displayed on the screen to congure. When "Connection has been
completed" is displayed, you are connected.
Note: If the access point you are
trying to connect is a Bualo
AirStation, enter the PIN code in
“Enrollee PIN” and click “OK.”