User Manual AirStation Nfiniti Wireless USB Adapter WLI-UC-G300N / WLI-UC-G300N-V1 WLI-UC-AG300N www.buffalotech.com 35011008 ver.01 v1.
Contents Chapter 1 Product Overview............................................ 4 Features................................................................................... 4 300 Mbps High Speed Mode.................................................... 4 System Requirements.............................................................. 5 Package Contents.................................................................... 5 Hardware Overview..................................................................
Chapter 4 Client Manager................................................. 30 Software Overview................................................................... 30 Using Client Manager V for Windows Vista............................. 30 Opening and Closing Client Manager............................................. 30 Main Screen.................................................................................... 31 Automatic Secure Setup and Advanced Setup...............................
Chapter 5 Trouble Shooting............................................. 59 The Computer does not recognize the Wireless Adapter......... 59 Cannot connect to the network wirelessly................................ 59 You forgot the AP's SSID, Encryption KEY, or Password......... 59 The link speed is slower than 300 Mbps (Maximum link speed is only 144Mbps).. 60 Other Tips................................................................................. 60 Appendix . .........................................
Chapter 1 Product Overview Features With support for current Wireless-N, Wireless-A, Wireless-G, and Wireless-B standards, the AirStation can transfer data to and from all standard 2.4 GHz wireless network devices. (Wireless-A is not supported in WLI-UC-G300N.) AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi Protected Setup) make connection with wireless devices easier. AirStation is equipped with following security features.
Chapter 1 Product Overview System Requirements Computer should be IBM/PC compatible (OADG specification) with a USB 2.0 port and a CD-ROM drive. * *This product does not support computers equipped with dual processors (computers with two physical CPUs). Computers with Dual core CPU's are supported. *AirStation does not support Windows Vista (32 bit) Standby mode. Compatible OS Windows Vista (32bit)/XP/2000 *Service Pack 2 or later is required for Windows XP. *Service Pack 4 and Internet Explorer 5.
Chapter 2 Installation Installing Wireless Drivers Follow the instruction below to install drivers. Do not connect the unit to your computer yet. 1 Boot your computer and insert AirNavigator CD. The AirNavigator Setup Wizard will launch automatically. Note: If the AirNavigator Setup Wizard doesn’t launch, double click "My Computer" > CD-ROM drive icon > "AirNavi.exe" to launch manually. 2 Click “Begin Installation”. 3 Click “AirStation Wireless LAN Adapters”.
Chapter 2 Installation 4 Disable any firewalls, and click “Next”. 5 Click “Install”. Note: • If you insert the check mark into the check box for Install Wireless Client Manager, you can install Client Manager as well as drivers. • Refer to the instructions on page 10 to install Client Manager after installing drivers. 6 WLI-UC-G300N / WLI-UC-AG300N User Manual Click “Next”.
Chapter 2 Installation 7 Read the license agreement, select “Agree”, then click “Next”. 8 When the screen to the left is displayed, put a check mark next to Always trust software from "BUFFALO INC.", and click “Install”. 9 When the screen to the left is displayed, attach the AirStation to your computer. Drivers will be installed automatically.
Chapter 2 Installation 10 Click “OK”. 11 After the drivers are installed, the screen at left will be displayed. Click “Finish”. Note: If you checked the box to Install Wireless Client Manager (page 7), then the installation screen for Client Manager will be displayed after this screen. Follow the instructions on the screen to install Client Manager. Drivers are now installed.
Chapter 2 Installation Installing Utility Follow the procedure below to install Client Manager. 1 Boot your computer and insert the AirNavigator CD. The AirNavigator Setup Wizard will launch automatically. Note: If AirNavigator Setup Wizard is not displayed, double click "My Computer" icon > CD-ROM drive icon > "AirNavi.exe". 2 Click “Options”. 3 Click “Advanced Installation”.
Chapter 2 Installation 4 Check the box for “Install Wireless Client Manager” and click “Install”. Note: Use Client Manager V with Windows Vista or Client Manager 3 with Windows XP/2000. 5 Click “Next”. 6 Read the license agreement and select “Agree”.
Chapter 2 Installation 7 Click “Next”. 8 Click “OK”. 9 Click “Back”. 10 Click “X” at the top right corner of the window to close it. Client Manager is now installed.
Chapter 3 Connect to a Wireless Network Automatic Secure Setup (AOSS/WPS (PBC) ) AOSS and WPS are systems which enables you to automatically configure wireless LAN settings. Just pressing the buttons will connect wireless devices and complete security settings. Utilize this system to connect to wireless devices, computers, or game machines which support AOSS or WPS. AOSS (AirStation One-Touch Secure System) is technology developed by BUFFALO. WPS was created by the Wi-Fi Alliance.
Chapter 3 Connect to a Wireless Network Windows Vista (Client Manager V) If you are using Windows Vista, use the included Client Manager V software to connect wirelessly with AOSS/WPS(PBC). 1 Click the icon in the system tray. 2 3 When the screen at left is displayed, click “Create Profile”. When the message “A Program needs your permission to continue” appears, click “Continue”. 4 WLI-UC-G300N / WLI-UC-AG300N User Manual When the screen shown at left is displayed, click the “WPS AOSS “ button.
Chapter 3 Connect to a Wireless Network Follow the instructions displayed on the screen. After you configured and if the message "Connection has been Completed" is displayed on Client Manager V, then you have completed the connection by AOSS/WPS (PBC). (If “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location” depending on the environment in which the AirStation will be used.
Chapter 3 Connect to a Wireless Network Automatic Secure Setup (WPS (PIN) ) WPS (Personal Identification Number) uses the mechanism which register the unique number generated by the utility program (Client Manager) included with this product to an access point and connect wirelessly.Use this feature when connecting to an access point which supports WPS (PIN).
Chapter 3 Connect to a Wireless Network 4 When the screen which looks like the illustration on the left displayed, click “Advanced Setup “ button. 5 When the screen which looks like the illustration on the left displayed, click “WPS-PIN” button.
Chapter 3 Connect to a Wireless Network 6 When the PIN code is displayed, write it down. After you write the PIN code down on a piece of paper, click “Next”. 7 Select the access point you are going to connect, and click “Next”. This screen will be displayed.
Chapter 3 Connect to a Wireless Network 8 Use an administrative computer which is connected to an access point with a wire in order to login to that access point. The screen to enter the PIN code will be displayed. Note: If the access point you are trying to connect is the AirStation, click “Wireless Config“> “WPS” on the TOP of the configuration screen. The screen to enter the PIN code will be displayed. 9 On the configuration screen of the access point, enter the PIN code you write down in step 6.
Chapter 3 Connect to a Wireless Network Windows XP (Client Manager 3) If you are using Windows XP, use Client Manager 3 which comes with this package and follow the procedure below to connect wirelessly with WPS (PIN). Note: Windows 2000 does not support WPS (PIN). 1 Right click on the icon PIN Code type”. displayed in the system tray, and select “Easy Connection” > “WPS 2 When the PIN code is displayed, write it down. Then, click “Next”.
Chapter 3 Connect to a Wireless Network This screen will be displayed. 4 Use a computer with a wired Ethernet connection to log in to the access point. The screen to enter the PIN code will be displayed. Note: If the access point you are trying to connect is a Buffalo AirStation, click “Wireless Config” > “WPS” on the TOP of the configuration screen. The screen to enter the PIN code will be displayed. 5 On the configuration screen of the access point, enter the PIN code you wrote down in step 2.
Chapter 3 Connect to a Wireless Network Manual Setup (Client Manager) You may also connect to an Access point manually, without using AOSS/WPS. The procedure varies depending on the version of Windows used. First, install Client Manager from the included CD. (page 10) Windows Vista (Client Manager V) With Windows Vista, use Client Manager V to connect wirelessly. 1 Click the icon . is displayed in the system tray. 2 3 When this screen is displayed, click “Create Profile.
Chapter 3 Connect to a Wireless Network 4 Click “Advanced Setup.“ 5 WLI-UC-G300N / WLI-UC-AG300N User Manual Click “Connect Manually.
Chapter 3 Connect to a Wireless Network 6 Select your access point, and click “Next”. 7 Enter your “Encryption Key” (passphrase) and click “Connect.” Follow the instructions in the wizard to connect. When "Connection Complete" is displayed, setup is completed. If “Set Network Location” is displayed, then select “Home”, “Work”, or “Public location” depending on the environment in which the AirStation will be used.
Chapter 3 Connect to a Wireless Network Windows XP/2000 (Client Manager 3) Client Manager 3 is a wireless connection utility for Windows XP/2000. 1 Right click on the icon in the system tray, and select “Scan”. 2 Select the access point that you are going to connect to and click “Next”. 3 Choose your “Encryption Method” and enter an “Encryption Key”. Click “Connect”. Follow the instructions on the screen to connect.
Chapter 3 Connect to a Wireless Network Manual Setup (Windows Utility) You can connect to an access point without installing or using Client Manager. Windows includes a built-in wireless utility. The procedure varies depending on the version of Windows used. Windows Vista (WLAN AutoConfig) You can use WLAN AutoConfig to connect to a wireless Access Point: 1 Right click on the wireless network icon 2 Click “Connect to a network”. 3 WLI-UC-G300N / WLI-UC-AG300N User Manual in the system tray.
Chapter 3 Connect to a Wireless Network If the screen below is displayed, click “I want to enter the network key or passphrase instead”.
Chapter 3 Connect to a Wireless Network 4 Enter the encryption key and click “Connect”. Follow the instructions displayed on the screen to finish configuration. If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location“ depending where you’re using the AirStation.
Chapter 3 Connect to a Wireless Network Windows XP (Wireless Zero Configuration) Windows XP includes a built-in utility to connect to your wireless Access Point. Note: If Client Manager 3 is installed on your computer, then Wireless Zero Configuration is disabled. Uninstall Client Manager 3 to use Wireless Zero Configuration, or just use Client Manager 3 to connect to the AirStation. 1 Right click on the wireless network icon 2 Click “View Available Wireless Networks”. in the system tray.
Chapter 4 Client Manager Software Overview Client Manager is utility software used to connect to an access point on the network or to verify the connection between an access point and your computer. It is included with this device. Note: There are two versions of Client Manager with this unit, "V" and "3". Client Manager V supports Windows Vista. Client Manager 3 supports Windows XP/2000.
Chapter 4 Client Manager Main Screen The Main screen displays the current connection status. You can perform the following operations from this screen. Parameter Meaning Profile Displays information about the current connection points. If you have multiple connection points, you can switch among them. Transmission Speed Displays the current connection speed. Signal Strength Displays the current signal strength.
Chapter 4 Client Manager Automatic Secure Setup and Advanced Setup There are two ways to connect to an access point: automatic or manual. In the following wizard, automatic setup will be reffered to as “AOSS/WPS” and manual setup will be referred to as “Advanced Setup”. Parameter Meaning Wireless Adapter Displays names of currently used wireless devices. Automatic Secure Setup Clicking this will search for an AOSS or WPS compatable access point to connect to automatically.
Chapter 4 Client Manager SSID / WPS-PIN selection This screen lets you select whether to connect to an access point by specifying the SSID or by enterring a WPS PIN. Parameter Meaning Connect Manually Specify SSID of an access point and configure connection settings. Click here to display the Searching Wireless Access Points screen (page 34). Connect with WPS-PIN Click this to connect to a wireless access point by entering its WPS PIN.
Chapter 4 Client Manager Searching Wireless Access Points The screen to list available wireless access points in your area. You can select an access point and enter network information manually to connect. Parameter Meaning Network Name (SSID) Displays the SSID of each available access point. Security Displays whether or not the access point uses encryption. Channel Displays the wireless channel used by an access point. Strength Displays the signal strength of an access point.
Chapter 4 Client Manager Wireless Network Information Configure wireless connection settings. Parameter Meaning Network Type Select a type of connection. Network Name (SSID) Enter the SSID of an access point. Security Type Select the security type of the selected access point. Encryption Method Select the encryption method of the selected access point. Encryption Key or Passphrase Enter the encryption key for the access point.
Chapter 4 Client Manager WPS-PBC / AOSS selection You may automatically connect to an access point by WPS (PBC) or AOSS. Parameter Meaning Automatic Secure Setup WPS-PBC method Click this to automatically connect to an access point that supports WPS (PBC). Automatic Secure Setup AOSS method Click this to automatically connect to an access point that supports AOSS.
Chapter 4 Client Manager Wireless Status This screen displays the current connection status. Parameter Meaning Adapter Displays the name of the current wireless client. Execute wireless LAN diagnostics Opens the Wireless LAN Diagnoses wizard (page 39). Profile Name Displays the current profile name. Status Displays the current transmission status. Network Mode Displays the current network mode. Transmission Speed Displays the current transmission speed.
Chapter 4 Client Manager Parameter Meaning Security Displays whether encryption is currently enabled or not. Authentication Type Displays the type of authenticaltion currently used. Encryption Type Displays the type of encryption currently used. Signal Strength Displays the current signal strength. IP Address Displays the IP address assigned to your wireless client. Subnet Mask Displays the subnet mask assigned to your wireless client. Default Gateway Displays the default gateway address.
Chapter 4 Client Manager Wireless LAN Diagnostic On the Wireless LAN Diagnostic screen, you can check signal strength and quality. Parameter Meaning Adapter Displays the name of the wireless client currently in use. Connection status Displays signal strength (dBm), link rate (Mbps), and signal quality (%) in 1 minute intervals. There are the following restrictions. • Some items may not be displayed depending on your wireless device.
Chapter 4 Client Manager Profile List Create a new profile or edit an existing profile. Parameter Meaning Adapter Displays the name of the wireless client which is currently used. New Create a new profile. Click this to display the Automatic Secure Setup and Advanced Setup screen (page 32). Edit Edit the selected profile. Click this to display the Extended properties (Wireless) screen (page 41). Delete Delete the selected profile. Down Lower the priority of the selected profile.
Chapter 4 Client Manager Wireless Properties Current wireless settings. Parameter Meaning Connection Displays the current profile name. SSID Displays the SSID of the current connection. Security Type Displays the security type you are using for the current connection. Encryption Type Displays the encryption type you are using for the current connection. Security key or Pass phrase Displays the security key or pass phrase if “Display password visible“ is checked.
Chapter 4 Client Manager Network Properties By default, your client’s IP address is set automatically by DHCP. You may configure it manually from this screen. Parameter Meaning Do not change IP Address settings of this Profile Select to keep your current TCP/IP network setting without any changes. This is the recommended setting. Use the following settings Select this option to change your TCP/IP network settings. For expert users only.
Chapter 4 Client Manager Browser Properties Configure Internet Explorer settings for wireless connections. Parameter Meaning Do not change the browser settings Select to keep the current Internet Explorer settings. of this Profile Use the following settings Select this option to configure the Internet Explorer Home Page and Proxy Server settings while connected wirelessly.
Chapter 4 Client Manager Printer Properties Configure the printer used while connected to an access point wirelessly. Parameter Meaning Do not change the printer settings of Select to keep your current printer settings. this Profile Use the following settings Select to use a different default printer while connected wirelessly.
Chapter 4 Client Manager Using Client Manager 3 with Windows XP / 2000 • When you install Client Manager, it will be added to your Startup folder and will automatically start with Windows. To launch Client Manager manually, click “Start” > “All Programs” > “BUFFALO” > “AirStation Utility” > “ClientManager3” . • Right click on the Client Manager icon in the system tray and click “Exit” to close Client Manager.
Chapter 4 Client Manager Status The Status screen displays the current connection status. Parameter Meaning Profile Current connection profile name. SSID SSID of the currently connected access point. Adapter Name Name ame of the wireless client currently in use. Network Type Current network mode. Transmission Speed Current transmission speed. Channel Current wireless channel. Security Displays whether security is currently enabled or not. IP Address The IP address assigned to this unit.
Chapter 4 Client Manager Parameter Meaning MAC Address MAC address of this unit. Duration Elapsed duration of the current wireless connection. Signal Strength Current signal strength. Reconnect Click to reconnect the most recent connection.
Chapter 4 Client Manager Scan Scan and display nearby access points. Parameter Meaning SSID SSID of access point. Wireless mode Wireless type (such as 11a and 11g) of the access point. Channel Wireless channel of the access point. Strength Reception strength of each access point. Encryption Displays if security is used by the access point. Connect Click this to display the Connect screen (page 49). Refresh Click here to search for available access points again.
Chapter 4 Client Manager Connect Configure connection to an access point. Parameter Meaning Encryption Method Type of encryption used by the access point. Encryption Key Enter the access point’s encryption key (passphrase). Register Profile Check to register this connection as a profile.
Chapter 4 Client Manager Profiles Connect to an access point or edit a profile. Parameter Meaning Connect Selecting a profile and clicking this button will connect to an access point using a stored profile. Add Click this to add a new profile. It will display the Profiles Information screen (page 51). Edit Click this to edit or delete information in a profile. WPS AOSS Click this button to have AOSS/WPS (PBC) automatically set security.
Chapter 4 Client Manager Profile Information (Basic) Configure your profile settings. Parameter Meaning Display Icon Select an icon to display on the profile from the list. Select Profile Connection may be wireless or wired (Ethernet). For use with the AirStation, select Wireless. Profile Name Enter a name for the profile. Network Type Select infrastructure mode to connect to an access point (recommended), or ad-hoc mode to connect directly to another wireless client.
Chapter 4 Client Manager Parameter Meaning Encryption Method Select the encryption method used by the wireless access point. Transmission Key If WEP is used for the Encryption Method, 4 passphrases may be entered. Use of the first (at least) is recommended. Encryption Key Enter the encryption key (passphrase) for the access point. AP is set to exclusive connection Check if the access point’s SSID is not broadcast.
Chapter 4 Client Manager Profile Information (Network) The profile’s IP address and subnet mask may be manually assigned. Parameter Meaning Do not change IP Address settings of this Profile Check to keep using current TCP/IP network settings. Automatically acquire the IP Address Check to automatically acquire the IP address from a DHCP server when connecting wirelessly.
Chapter 4 Client Manager Profile Information (Browser) Configure your Internet Explorer settings when connecting wirelessly. Parameter Meaning Do not change the browser settings of this Profile Check to use current Internet Explorer settings when connecting wirelessly. Uncheck to use any of the settings below. Address to use as Home Page To use a different home page in Internet Explorer when connecting wirelessly, enter it here.
Chapter 4 Client Manager Profile Information (Printers) Configure the printer that your computer uses when connected wirelessly. Parameter Meaning Do not change the printer settings of this Profile Select this option to use a different printer when connecting wirelessly.
Chapter 4 Client Manager System Tray Menu Right-click on the Client Manager icon in the system tray to display the following choices. Parameter Meaning Status Displays the Status screen (page 46). Scan Displays the Scan screen (page 48). Profile Displays the Profiles screen (page 50). Easy Connection Runs Automatic Secure Setup, using one of the following connection methods: AOSS, WPS(PBC), or WPS(PIN). Help Displays Client Manager Help. Option Displays the Options menu screen (page 57).
Chapter 4 Client Manager Option Menu Configure Client Manager options. Parameter Meaning Mode Switch between Client Manager’s operating modes. If you select “Business Mode”, the button to configure 802.1x authentication appears on the Profiles screen (Page 50). “Home Mode” is recommended. Lock If you click this, you will not be able to add new profiles or edit existing profiles. To lock or unlock, enter the password (8 - 63 characters).
Chapter 4 Client Manager Parameter Meaning Initialize profile Click this to initialize profile information. Before initializing profile information, unlock the unit. Use the following network adapter Select a network adaptor to use in Client Manager. “Wireless Adapter Auto-select” is recommended for most users. Automatically connect to the profile with highest priority If checked, it will attempt to connect to the profile with highest priority as assigned on the Profile screen (page 50).
Chapter 5 Trouble Shooting The Computer does not recognize the Wireless Adapter. • Make sure this unit is connected to a USB port on your computer. • If your computer has multiple USB ports, connect to a different USB port. • Refer to page 6 "Install Wireless Drivers", and reinstall drivers for this unit. Cannot connect to the network wirelessly. • Refer to chapter 3 to connect this unit to an access point wirelessly.
Chapter 5 Trouble Shooting The link speed is slower than 300 Mbps (Maximum link speed is only 144Mbps). The default setting for 300 Mbps mode on the AirStation is “off”. Refer to "300 Mbps Mode settings" on page 63 to turn on 300 Mbps mode. Other Tips Issue: When using the Windows wireless connection manager, I cannot connect to my wireless router. I receive a "Cannot configure wireless network" error message when scanning for available wireless networks.
Chapter 5 Trouble Shooting Issue: What can I do if my wireless connection drops randomly or seems slow? Answer: There are many environmental factors that may affect this behavior. First, ensure the issue is not range related by locating the wireless router and the client in closer proximity and check whether the connection drops continue. In some cases, interference from other wireless networks or sources such as 2.4 GHz wireless phones may impact performance.
Chapter 5 Trouble Shooting Issue: Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products? Answer: The latest drivers and firmware with installation instructions are available online at www.buffalotech.
Appendix 300 Mbps Mode settings By default, the AirStation’s 300 Mbps mode is disabled. Use the following proceedure to enable it if desired. 1. Click “Start” > “All Programs” > “BUFFALO” > “AirStation Utility” > “AirStation Bandwidth 20 or 40MHz Select Tool” and launch the utility software. If you are using Windows Vista and see the message "A program needs your permission to continue", click “Continue”. 2.
Appendix Specifications WLI-UC-AG300N Wireless LAN Interface Standard Compliance IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n (Draft 2.0) Transmission Method Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO Frequency Range IEEE802.11a: 5,180 - 5,320MHz (Channels 36, 40, 44, 48, 52, 56, 60, 64) IEEE802.11b/g: 2,412 - 2,462MHz (Channels 1 - 11) IEEE802.11n (20MHz): 2,412 - 2,462MHz (Channels 1 - 11) 5,180 - 5,320MHz (Channels 36, 40, 44, 48, 52, 56, 60, 64) IEEE802.
Appendix WLI-UC-G300N / WLI-UC-G300N-V1 Wireless LAN Interface Standard Compliance IEEE802.11b / IEEE802.11g / IEEE802.11n (Draft 2.0) Transmission Method Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO Frequency Range 2,412 - 2,462MHz (Channels 1 - 11) Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, 1Mbps 802.11n (Draft 2.0) 20MHz BW (LongGI) 130, 117, 104, 78, 52, 39, 26, 13Mbps (2stream) 65, 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps (1stream) (ShortGI) 144.
Appendix Removing the device from the computer Windows Vista/XP If you use Windows Vista / XP, just unplug it. Windows 2000 If you use Windows 2000, follow the procedure described below. 1. Click the icon ( ) displayed in the system tray. 2. Click "Safely remove BUFFALO **** Wireless LAN Adapter". 3. Click “OK”. 4. Unplug this unit. ( **** is the model number of the device.) Uninstalling the Software To uninstall the software, follow the procedure described below. 1. Insert AirNavigator CD.
Appendix TCP/IP Settings in Windows Windows Vista To configure TCP/IP settings for Windows Vista, follow the procedure below. 1 Click Start > Settings > Control Panel. 2 Double-click “Network and Sharing Center”. 3 Click “Manage network connections” on the left side menu. 4 Right-click on “Local Area Connection”, then click “Properties”. 5 When the message “Windows needs your permission to continue” appears, click “Con- 6 Select “Internet Protocol Version 4 (TCP/IPv4)” then click “Properties”.
Appendix Windows XP/2000 To configure TCP/IP settings for Windows XP, follow the procedure below. 1 Click Start > Settings > Control Panel. 2 Double click “Network”. 3 Right click on “Local Area Connection”, then click “Properties”. 4 Select “Internet Protocol (TCP/IP)”, then click “Properties”. 5 Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”, and then click “OK”. 6 Click “Close”.
Appendix Compliance Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not comply with related RF exposure rule and such use shall be prohibited. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination.
Appendix Basic standard for the measurement of specific absorption rate related to human exposure to electromagnetic fields from mobile phones (300 MHz-3 GHz) • EN50392 : (2004-01) Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) • EN 300 328 V1.7.
Appendix Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz). • EN 300 328 V1.6.1 (2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
Appendix (EMC) standard for radio equipment and services; Part 1: Common technical requirements In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.
Appendix Česky [Czech] Buffalo Technology Inc. tímto prohlašuje, že tento AirStation WLI-UC-G300N(-V1) / AG300N je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Buffalo Technology Inc. erklærer herved, at følgende udstyr AirStation WLI-UCG300N(-V1) / AG300N overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt Buffalo Technology Inc.
Appendix Latviski [Latvian] Ar šo Buffalo Technology Inc. deklarē, ka AirStation WLI-UC-G300N(-V1) / AG300N atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo Buffalo Technology Inc. deklaruoja, kad šis AirStation WLI-UC-G300N(-V1) / AG300N atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart Buffalo Technology Inc.
Appendix Svensk [Swedish] Härmed intygar Buffalo Technology Inc. att denna AirStation WLI-UC-G300N(-V1) / AG300N står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Appendix Environmental Information • The equipment that you have purchased has required the extraction and use of natural resources for its production. • The equipment may contain hazardous substances that could impact health and the environment. • In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems.
Appendix Warranty Information Buffalo Technology (Buffalo Inc.) products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Buffalo Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (Buffalo Inc.) installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technology/(Buffalo Inc.
Appendix Contact Information (USA / Canada) Buffalo Technology USA Inc. 11100 Metric Blvd, Suite 750 Austin, TX 78758-4018 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 Fax: 512-794-8520 | Email: sales@buffalotech.com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 Email: info@buffalotech.
Appendix Contact Information (Europe) Buffalo Technology UK LTD 176 Backingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Email: sales@buffalo-technology.com TECHNICAL SUPPORT Buffalo Technology provides technical support in English, German, French, Italian, and Spanish.
Appendix Contact Information (Asia Pacific) Australia TEL: 1300 761 310 China TEL: 86-800-820-8262 e-mail: support@buffalo-china.com Hong Kong TEL: 852-2345-0005 e-mail: support@hornington.com India TEL: 1-8004256210 e-mail: csbuffalo@accelfrontline.in Indonesia TEL: 021-6231-2893 Malaysia TEL: 03-5032-0138 e-mail: buffalo@ecsm.com.my Philippines TEL: 2-688-3999 e-mail: digisupport@msi-ecs.com.ph Republic of Korea TEL: 02-2057-2095 e-mail: support@buffalotech.co.
