User manual

- 6 -
Chapter 1 Product Overview
3 blinks
*2
: Wired Ethernet LAN error.
4 blinks
*2
: Wireless LAN error.
5 blinks: USB error.
9 blinks
*2
: System error.
Continuously
blinking
*1
:
Updating rmware, saving settings, or initializing settings.
*1 Never unplug the AC adapter while the Diag LED is blinking continuously.
*2 Turn o AirStation rst, wait for a few seconds, then turn it back on.
3
5 GHz LED (Blue)
On: 5 GHz wireless LAN is enabled.
Randomly blinking: 5 GHz wireless LAN is transmitting.
2 blinks: AirStation is waiting for an AOSS or WPS security key.
Continuously
blinking:
AOSS/WPS error; failed to exchange security keys.
Note: This LED is o when “LED Setting” is set to o. The default setting is o (Disable). Enable the wireless
function by referring to “Wireless & Encryption” (page15).
4
2.4 GHz LED (Green)
On: 2.4 GHz wireless LAN is enabled.
Randomly blinking: 2.4 GHz wireless LAN is transmitting.
2 blinks: AirStation is waiting for an AOSS or WPS security key.
Continuously
blinking:
AOSS/WPS error; failed to exchange security keys.
Note: This LED is o when “LED Setting” is set to o. The default setting is o (Disable). Enable the wireless
function by referring to “Wireless & Encryption” (page15).
5
LAN LED (Green)
On: An Ethernet device is connected.
Blinking: An Ethernet device is communicating.
6
Antenna Connector Screw on the included antennas here.
Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.