User manual

- 60 -
Chapter 3 Conguration
Parameter Meaning
Status If “Registered” is displayed, remote management mode by Admin
Tools is enabled. Certain parameters and content that can be set
from this interface may be partially restricted.
If “Unregistered” is displayed, remote management mode by Admin
Tools is not enabled.
Revoke registration
Click this button to cancel remote management mode in Admin
Tools.
Save/Restore Settings
This lets you save or restore the current settings of an AirStation on a computer.
---> Admin Cong > Save/Restore Settings
Parameter Meaning
No le found This is used to save the current AirStation settings to a
conguration le.
Also, the settings that were saved in the conguration le can be
restored.
The location where the conguration le is saved or restored from
can be selected from a computer accessing the AirStation setting
screen or a USB memory device connected to the AirStation.