User manual

- 40 -
Chapter 3 Conguration
Parameter Meaning
SSID Species the SSID where the security is set.
Broadcast SSID When enabled, you can search for the AirStation.
Select Enable when using the Windows XP (SP2 or earlier) standard
wireless connection function.
Privacy Separator Restricts communication between wireless devices connected to
the same SSID.
STA separator
Prohibits communication between all wireless devices connected
by this wireless standard.
SSID separator
Prohibits communication to wireless devices except those
connected to the same SSID.
Disable
No restrictions are placed on communication between wireless
devices.
Note: The privacy separator function does not prohibit communication
that passes through WDS (repeater) or wired LAN ports. As a
result, communication that passes through wireless device proxies
cannot be restricted.
Load Balancing The maximum number of wireless devices that can be
simultaneously connected to the AirStation can be set here. If
multiple AirStations are run at the same time, this function can be
used to enable load balancing.
Security Mode Sets the authentication system used for wireless device connection.
No authentication
The AirStation does not request authentication when a wireless
device is connected.
WEP
This performs wireless device authentication compliant with WEP.
A xed-length encryption key (shared key) must be set in both the
AirStation and wireless device to perform encryption.
The WPS function is disabled.