User manual

- 26 -
Chapter 3 Conguration
LAN Port
This makes the settings for a wired LAN port.
---> LAN Settings > LAN Port
Parameter Meaning
Wired LAN Port Displays the port number of the wired LAN port.
Enable Sets the wired LAN port status to Enabled or Disabled.
Media Type Sets the communication speed of the wired Ethernet connection.
Normally, use at the “Auto” setting. If the connected device cannot
be automatically recognized, try using another setting.
MDI Sets the communication status (straight-through or crossover
connection) of the AirStation with the connected device.
Normally, use at the “Auto” setting. If the connected device cannot
be automatically recognized, try using another setting.
Flow Control Sets ow control.
If ow control is enabled, overows of the receive-side buer
are detected, and a specic frame is sent to enable send-side
restriction.
802.3az Sets IEEE802.3az EEE.
When enabled, the power supplied to the LAN port when data is
not owing can be limited.
Note: The device connected to the AirStation must also support
IEEE802.3az EEE.
If the IP address, IP address setting method, management VLAN ID, or VLAN settings of the wired
LAN port is changed, you may be unable to proceed with the setting operation.