User manual

35
If AOSS or WPS connection is not established after 3 minutes, the AirStation will cancel setup and return to nor-
mal.
Up to 24 wireless devices can be connected with AOSS. Settings configured by AOSS can’t be modified.
To change the settings, either run AOSS again or disable AOSS and configure settings manually.
AOSS is disabled by default.
To connect a non-AOSS device to a network configured with AOSS, enter the SSID and key in the device’s settings
manually.
If SSID 1 is configured, its settings will be used by AOSS configuration. The following security settings will not be
used:
WPA2-PSK AES
WPA2-PSK TKIP
WPA2-PSK TKIP/AES mixed mode
AOSS can’t be used if the SSID 1 encryption key contains spaces or 64 hexadecimal characters.
WPS
You can make detailed changes to WPS settings here.
Wireless Settings - WPS
WPS Select whether to enable or disable WPS (Wi-Fi Protected Setup).
AirStation PIN
Displays the PIN code of the AirStation. Click Generate PIN to generate a
new PIN code.
Push-button WPS Click Start to start WPS.